KNine

Active Member

• Apr 28, 2016

• #1

Friend has mot re test tomorrow. We are fitting rear anti roll bar links x 2. He took one end off last night but drove to me tonight. Now the two links are our of sync. How do we get them both level to re fit links. Is this an ACE thing??
Thanks in advance

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Apr 28, 2016

• #2

pics?

 

KNine

Active Member

• Apr 28, 2016

• #3

Bit difficult to photo, the D2 anti roll bar seems to have hydrolics on one side, so when you line up one side to fit a drop link, the other side will not mate up to fit the other drop link. The instinct is to pull the dar down, but the pressure in the hydrolics stops this. I imagine we have to release some hydrolics pressure?

 

biggeeeee

Retired - Living the dream

• Apr 28, 2016

• #4

Just done mine last week, had no problem fitting them.
Cut the old ones off with a cutting disc and stuck the new ones on in 10 mins.

 

biggeeeee

Retired - Living the dream

• Apr 28, 2016

• #5

KNine said:

Bit difficult to photo, the D2 anti roll bar seems to have hydrolics on one side, so when you line up one side to fit a drop link, the other side will not mate up to fit the other drop link. The instinct is to pull the dar down, but the pressure in the hydrolics stops this. I imagine we have to release some hydrolics pressure?

Click to expand...

Is yours fitted with ACE?

 

KNine

Active Member

• Apr 28, 2016

• #6

I believe it is ACE fitted. I don't know anything about ACE

 

biggeeeee

Retired - Living the dream

• Apr 28, 2016

• #7

From RAVE

Top right picture has drop link in it

 

jamesmartin

Well-Known Member

• Apr 28, 2016

• #8

KNine said:

Friend has mot re test tomorrow. We are fitting rear anti roll bar links x 2. He took one end off last night but drove to me tonight. Now the two links are our of sync. How do we get them both level to re fit links. Is this an ACE thing??
Thanks in advance

Click to expand...

jack up the other side, might need to undo one of the caps on the ram pipes to let a little oil out

 

KNine

Active Member

• Apr 28, 2016

• #9

Thanks Bigeeee for rave. Problem now solved. My mate read about releasing pressure somwhere on web.
So thanks all, all will be done in 10 minutes

 

KNine

Active Member

• Apr 28, 2016

• #10

Thanks James Martin, that's what he did, good job