Bit difficult to photo, the D2 anti roll bar seems to have hydrolics on one side, so when you line up one side to fit a drop link, the other side will not mate up to fit the other drop link. The instinct is to pull the dar down, but the pressure in the hydrolics stops this. I imagine we have to release some hydrolics pressure?
jack up the other side, might need to undo one of the caps on the ram pipes to let a little oil outFriend has mot re test tomorrow. We are fitting rear anti roll bar links x 2. He took one end off last night but drove to me tonight. Now the two links are our of sync. How do we get them both level to re fit links. Is this an ACE thing??
Thanks in advance