can i just change my becm to the one out of a doner car or will i have to have it programed some how thanks

hi all i have just fitted a full cream leather interior to my p38 2.5 dse and the wiring loom has been changed for the 1 out of the vogue p38 the problem i have is that non of the electrics work any help would be nice thanks

hi can anyone tell me if the gearbox on the p38 2.5 dse manual is hydrolic as i have lost all gears and i have just changed my radiator with the oil cooler on thanks any help would be apreciated :(

while the head is off you might as well re grind your valves it does help alot

i bought these 18s now i want somthing bigger

hi i have just been out in my p38 and when i came back to start it only about 30 minitues it took ages but eventuall fired drove perfect all the way home then when i got home and turned it off waited 5 mins and then turned the key i have got no glow plug light where is the first place to...

i had a loud tapping sound when i first got my rr 2.5 after all the changing the oil and a good service the tapping never went away . then i thought it could be an injector so i removed the airbox and sprayed a very small amount of easy start up the intake .in short spurts and every injector...

hi if you are still having problems i have the lead and eas softwere i am only in hucknall so you are more than welcome to check if you have any faults just pm me cheers

i would just like to say a big thank you to irishrover for all you help and advice thanks again great help chip2366:D

it will be ok i had to drive back from london to nottingham on bump stops and lets just say it was very interesting to say the least if it helps i am in the nottingham area i could do it for you or tell you what it is no charge

lol that would be just swell if you could send me the plans i will look over them and give a little advice .....and dont forget to patent it should be a screem whooooooo whooop :violent:

much appreachiated for your help and your advice

does anyone know were i could download autodata from sorry if it has been asked already thanks:mad:

bring nack the desart please

i have now fitted the wheels and all i had to do was drill them out with a 22mill drill bit and then drill again with a 23 mm drill bit but you still have to get the new nuts to as the p38 wheel nuts are huge compaired to the later models also fitted power vents on the wings to nice touch :)

hi has anyone tried to put a later model front bumper on a p38 want to try it . ive done the side power vents just wondering if it is easy thanks

thanks for you advice will have a go

thanks i will give it a new fuel filter and stp it and go from there

thanks for that not sure how much pressure the tank holds but even if it was only for emergency use i now i have woke up meny times to a flat and you only need enough to get to nearest air line or blow some crap out of polen filters and hard to reach areas thanks again

does anybody know if it posible to put a air line an to the air tank were it has a large screw thred on . just thought it could help get you out of a few break downs and some some compressed air tools like de grease gun or air cleaner thanks chip