hi all i have just fitted a full cream leather interior to my p38 2.5 dse and the wiring loom has been changed for the 1 out of the vogue p38
the problem i have is that non of the electrics work any help would be nice thanks
There are a couple of leads that are in the Becm harness if the seats are electric and memory. One is a small black square plug which is located below the becm fuses to the extreme left. The other is a green plug located on the opposite side of the becm (Nearest the floor tunnel) at the extreme left.
As already posted you also need the "H" level becm...have a look on the label above the fuses to see which version you have..there will be either a "H" or "L"
You should go for a experienced mechanic to solve your problem, everyone here can only give you suggestions and if you are not do it nicely you will be caught by a big problem so go for the relevant person he will solve everything........