Could you use any of these and bend them to suit?

Try this link ;)

You can check the Watts linkage by grabbing hold of the roof gutter and rocking the car from site to side, if it's the Watts linkage you'll hear it clunking. This link may help :)

Suggest you check the water pump 'P' gasket on the nearside of the engine bay and the rad (particularly at the bottom). Both of those have caused coolant leaks on my disco in the past.

Try here for a how to post pictures

It was quite some time ago that I did mine and I can't remember what the inside looks like. I think I could get it to work one way but the motor wouldn't switch over to cycle to and fro properly - hence going for a replacement unit.

I had brake judder and was doing the "where should I buy new discs/calipers from" bit, however it seems to have gone away of it's own accord! Really puzzled as to why - I used to get a juddering through the brake pedal (not thro the steering) particularly when braking hard from high speed or...

OK; is the locking mechanism on the seats moving at all? Mine just release easily as soon as you give the strap a good tug. The catch was sticky at first but a dosing of WD40 followed by some ordinary general purpose grease sorted it.

I haven't got the folding rear seats in mine but this is from the owners manual: Stowing the seats NOTE: Before stowing a seat, ensure that the drinks tray to the side of the seat has been emptied, and that the seat belt buckle is folded down to prevent it from becoming trapped between the...

Hi Tom This fred about rear suspension bushes might be worth a read HTH

I like my disco :)

i haven't got any driving lamps but now I've read this fred and the instructions from PaulMC I want some!

Mines looking dodgy too, but hopefully not as bad as yours, might get away with a few coats of Hammerite - it's on the list of things to do

I've got as far as cleaning and scraping the underside all over and have hammerited about three quarters of the chassis etc., just need to get round to finishing the painting before I get the waxoyl gun out.

OK, sorry didn't realise your's is a V8. Hope you get it sorted

Does this link help? Worked for me :)

Yes - Pick up is quicker on acceleration, not sure about fuel consumption as I don't check it. My EGR valve was quite crusted up - I've kept it in case I ever need to re-fit it. It can't be a good thing to re-circulate all that crud back through the engine. A copy of the instructions are here...

I fitted on of these - works fine, no problems and fitting instructions were clear

Fitted me cruise control switches, works a treat!

It is good form to introduce yourself in the relevant section and read some of the FAQs before asking questions. This helps avoid (but doesn't eliminate) mickey taking. You may find this helps work out what to do with the vacuum pipes :)