just looking at egr removal kits and I was wondering if there is any benefit of the ally ones over stainless ar steel,obviously steel rusts so I will give that a miss but one of the ads states that ally kits expand at the same rate as the manifold which they say is a benefit over stainless steel does anybody have any idea if they are better or just look nicer?
discodrivercumbria
Well-Known Member
i will sell you one, 2 weeks i have had it, they sent me 2!!! but i only wanted 1
Item number: 130739661644 o0ff ebay new price
its yours for £25.00 p+p
discodrivercumbria
Well-Known Member
that's to put the vacuum pipe off the brake servo onto
Headtester
Active Member
I fitted on of these - works fine, no problems and fitting instructions were clear
discodrivercumbria
Well-Known Member
if you go for one of these, the pipe fits straight on, if you get one that hasn't you have to block the pipe with something ,ie screw etc,
fitted in less than 30mins, you have to make sure your studs are well penetrated with oil first and not stuck solid as you can snap them off,
Headtester
Active Member
Yes - Pick up is quicker on acceleration, not sure about fuel consumption as I don't check it. My EGR valve was quite crusted up - I've kept it in case I ever need to re-fit it. It can't be a good thing to re-circulate all that crud back through the engine. A copy of the instructions are here in case you wanted a look. Go for it!
