body line is good stuff i use there panel wipe, but i get mine from brown brothers (part of unipart)

Ah can't fault the stonechip stuff yet.. ah did the inside of rear tub a couple of years ago and it's still going strong... even after the abuse it gets with throwin' allsorts in there;)
 
i can't believe buster has just admitted to touching up the paint on the INSIDE of his landy

e'll be having the back of it upholstered in some sorta faux leather next !
 
i can't believe buster has just admitted to touching up the paint on the INSIDE of his landy

e'll be having the back of it upholstered in some sorta faux leather next !
Ah'm afraid so Sean;) It was down to bare metal in quite a few places, so decided tae stonechip it so it might last a bit longer:D

Hmmmm... now ye've got me thinkin'....

:p;):D
 
What have you done your Land Rover today?????

Well, for the first time in a long time, I did......... NOTHING :)

I felt a bit lost actually. Mind you, on Saturday I need to remove the dash again, as like an idiot, I only connected the airiel lead, and forgot about the power lead for the stereo, which I tucked way down into the depths of the dash like a total fecking spanner.

In my defence, I was very cold, very tired, very hungry, and it was turned midnight by the time I finished that job.
 
Didn't get anything done yesterday because of me c/h boiler probs.. Don't know if ah'll get owt done tonight as going to get me wee dug scanned to see if there's any puppies and how many if there is;):D
 
I replaced the n/s/f airspring, swapped the wheels front to rear, checked the brakes, fitted a hot start timer relay gizmo thingy from ebay, added some fuel injection cleaner and slick 50, took out the ignition barrell lubed it up and refitted it, cleaned it then went for a drive :)
 
put on a new fuel filter after the brother-in-law fitted the lift pump the same way his was fitted,
which was the wrong way round for mine
forcing it to clog up
oh an strapped the air box down a bit better so the bonnet shuts properly now too:rolleyes:
 
Finally got the front of the bulkhead keyed and stonechipped tonight...

Bulkheadmods042.jpg


Bulkheadmods043.jpg

Once that's dried ah'll key it again and get another coat of primer on there before painting it.

Ah also keyed the back as well ready for paint.

;):D
 

Similar threads