cleaned up Flywheel off BB's old 200tdi injun, & dressed the teeth as they is a bit worn :(
fitted flywheel to injun.
fitted noo spigot bush.
Fitted noo clutch
Fitted noo HD clutch fork and the fooking Pushrod, retaining clip snapped while I was fitting it :mad: fooking crap Britpart.
tried to refit gearbox. fooker wouldn't close up. :mad: Took it back out and discovered the friction plate had slipped :eek:
Realigned clutch with state of the art, long reach socket and insulating tape. :D
refitted gearbox and it went staright in.. Yeah :D :D
Fitted noo Slave cylinder. & bled clutch. all done and dusted Hopefully :eek:

fingers crossed mate.
 
cleaned up Flywheel off BB's old 200tdi injun, & dressed the teeth as they is a bit worn :(
fitted flywheel to injun.
fitted noo spigot bush.
Fitted noo clutch
Fitted noo HD clutch fork and the fooking Pushrod, retaining clip snapped while I was fitting it :mad: fooking crap Britpart.
tried to refit gearbox. fooker wouldn't close up. :mad: Took it back out and discovered the friction plate had slipped :eek:
Realigned clutch with state of the art, long reach socket and insulating tape. :D
refitted gearbox and it went staright in.. Yeah :D :D
Fitted noo Slave cylinder. & bled clutch. all done and dusted Hopefully :eek:



bloody hell :eek: [smile] I am not worthy [/smile].

Changed 2 wheels over, checked engine fluids and wired in my spare wheel CBA aerial mount I got from Teddywood some while ago.
 
Was removing the OD earlier and when I looked down onto the seatbox there was red stuff, didn't know what it was so kept working away and then I saw it dripping from my finger.

Somehow managed to cut my finger, deeper than it looks but not too bad, reckon I must have caught it on the inside of the gearbox casing and not felt it as it was freezing outside



AD5FFFC9-D0B5-4D1F-A6D8-A414ED9B2DE2-3176-00000250513F2660_zps54b9d6e7.jpg


21EE3216-1967-4BA4-95CF-95E86085F46A-3176-0000025043175264_zps410f495b.jpg
 
Was removing the OD earlier and when I looked down onto the seatbox there was red stuff, didn't know what it was so kept working away and then I saw it dripping from my finger.

Somehow managed to cut my finger, deeper than it looks but not too bad, reckon I must have caught it on the inside of the gearbox casing and not felt it as it was freezing outside


Looks like a Fairey..................ya big gurly wuss :p
 
Looks like a Fairey..................ya big gurly wuss :p

I kept working for another 2 hours after :p had to chisel through the seatbox tunnel as I wasn't getting the bolts out!

Whole chassis had collapsed and there was no way I was going to crawl under it just incase it dropped some more :eek:

Well if its a fairey it was a free fairey :D gonna clean it up and have a look inside to see how it is condition wise
 
It looks good :D

my disco bottle jacks fecked so it might be used now once I grease it


also got this, no idea what name is on it as I've not cleaned it yet but looks handy!

4C81E587-A93F-4CF8-8B92-76E78C88D872-3176-00000254888F5C13_zps71779a17.jpg
 
If you don't mind me asking, what was the problem? My mate has a F reg Defender with a retro fit 300tdi and the brakes are shocking despite our efforts to resolve, new master cylinder, been bled several times, callipers overalled etc...


It'd help if we knew who this was aimed at. Try clicking the quote button, in the post that you're replying to.
 
Last edited:
Finally got all the bits together and completed the timing belt change!

We came across several issues that needed resolving along the way, poor standards of repair left by shoddy workmanship before I took the LRD in to my care.
 
Changed door hinge bolts for shiney stainless ones with new nylocs.
Looked at the stereo wiring for a while the decided against it.
 

Similar threads