Disco was tramlining on motorway after fitting new tyres so had a look at it when I got home.
It's been getting vague on the steering for a while come to think of it, anyway I found loads of play in the swivel bearings so will have to do both sides this week.
Good job the weather is going to be fine
It's been getting vague on the steering for a while come to think of it, anyway I found loads of play in the swivel bearings so will have to do both sides this week.
Good job the weather is going to be fine
fastfun1965
New Member
mine has spent the day being thrashed around yarwell off road quarry
Lol. No idea. No labels or stamps on it? Hopefully this one will last longer. I think the seal behind the passenger side vent is damaged and water maybe getting into the motor. I never use the vents so will probably seal em up permanently to be safe.
johnny curt 1
Well-Known Member
fitted decent seats and made the brackets for the middle seat after some carefull setting out with a coco-pops box
and fitted the fully reconditioned fuel dist pump ready for tomorows fun and games bleeding it up ( hopefully itll be 3rd time lucky )
and wired a new numberplate light on the arse end aswell as fitted a new temp sender unit
and couldnt resist fitting a brand new transfer box lever rubber boot
and then took ownership of a pair of 6" speakers that one of the neighbours was throwing out ( house speakers left for the bin men )
gonna get some more chipboard out in the morning and fortify the rear wheel arches in the tub and maybee concoct some sort of housings for the speakers :smokin:
and fitted the fully reconditioned fuel dist pump ready for tomorows fun and games bleeding it up ( hopefully itll be 3rd time lucky )
and wired a new numberplate light on the arse end aswell as fitted a new temp sender unit
and couldnt resist fitting a brand new transfer box lever rubber boot
and then took ownership of a pair of 6" speakers that one of the neighbours was throwing out ( house speakers left for the bin men )
gonna get some more chipboard out in the morning and fortify the rear wheel arches in the tub and maybee concoct some sort of housings for the speakers :smokin:
Dr No
Active Member
drove it on a landing craft, went to a small island and took it shooting
that sounds like a great weekend!!
Dr No
Active Member
Disco was tramlining on motorway after fitting new tyres so had a look at it when I got home.
It's been getting vague on the steering for a while come to think of it, anyway I found loads of play in the swivel bearings so will have to do both sides this week.
Good job the weather is going to be fine
Found I have the same problem
Is it a tough job? Maybe leave it to a professional??
Andy Land
Well-Known Member
Found I have the same problem
Swivel pins and bearings took me a day on my Fender which included fitting new wheel bearings ... not a bad job but quite greasy
DEFENDER90-DAZ
New Member
Finally got the rev counter fitted and working
Daz
Daz
DEFENDER90-DAZ
New Member
Wired in the massive winch isolation switch and 10mm eye crimps on the battery leads for battery terminal connectors with posts
Daz
Daz
Wiganerdan
New Member
Ordered front prop UJs, A Front Diff, A VCU, a drag link assy, A track rod assy and a steering damper.
Freelaner
Landy Driver
threatened to beat it with large stick basil faulty style
http://www.youtube.com/watch?v=78b67l_yxUc:D:D
gemsdad
NOT BOTHERED.
hi WD,what part of wigan are you from??.
Wiganerdan
New Member
I'm from Hindley.
