3.5 efi
Well-Known Member
Welderised me door yesterday and very impressed with its new found rigidity and lack of general flappiness.....not quite so impressed with its self opening ability on left hand corners so reset the hinges today
:nopics:
:nopics:
DEFENDER90-DAZ
New Member
Bought it a shiny clutch claw
Hamsterberg
Well-Known Member
Made a quick release tow bar
defender11069
AKA Mr cool...
very smart mate good job90% fitted
Just need to do a couple of things and jobs a good one!!
Daz
DEFENDER90-DAZ
New Member
Cheers mate!
Took me all day to wire it all up and get it fitted.
All the gauges work properly except the 2nd volt gauge - but thats for when i fit the 2nd battery and split charge.
Daz
Steve Elliott
New Member
fitted a new rocker cover gasket and stopped the oil leaking from the vacc pump housing now got to find out where the water is going to(expansion tank sounds like a kettle) also how do I slow tick over down its a P38 diesel runs perfect but ticks over at around 750-800
DEFENDER90-DAZ
New Member
Fitted a new filler cap as the old one was stiff to open and only had 1 key.
Daz
Daz
chunkymunky
New Member
Someone's been busy.
Fitted new temp gauge which seems to work ok. Started doing spot spraying on the Landy. So be honest I can't be arse with a smart job. Just want it same colour......ish. I am thinking that I might ask next door to where I work for off cuts of vehicle vinyls and eventually turn the whole think urban combat colours.
Fitted new temp gauge which seems to work ok. Started doing spot spraying on the Landy. So be honest I can't be arse with a smart job. Just want it same colour......ish. I am thinking that I might ask next door to where I work for off cuts of vehicle vinyls and eventually turn the whole think urban combat colours.
Grit Valve
2000 4.6 Vouge
Checked battery 44% no bad cells , alternator spurting 14.4,so a good charge
To many short journeys I guess with heaters full blast and lights on
Washed n polished still waiting for my lz window sticker
To many short journeys I guess with heaters full blast and lights on
Washed n polished still waiting for my lz window sticker
bencorkill
Well-Known Member
changed rear springs and dampers to heavy duty super gaz one i think, nice and yellow new poly bump stops , gonna crack on with front springs and dampers tomorrow, if got time going to put braided brake lines on aswell
new poly bump stops , gonna crack on with front springs and dampers tomorrow, if got time going to put braided brake lines on aswell 
lordtwotter
Member
Towbar off. Mud flaps off. Then made a hole on my rear cross member
discostew38
Active Member
Put the seats and carpets back in after my water leak fix
discomark10
Well-Known Member
alot of nothing, tube cutter gave up the ghost, rebuilt, ajusted and repaired. Cut sum tube, welded it up an realised i got the angle wrong..... Day waisted lol...... Facepalm
