JohnM70 · Aug 2, 2015

Well....

channi · Aug 2, 2015

finally a new boot floor next on the list is the rear arches i f**ked up in the prosess

honolulujoe · Aug 2, 2015

hung the doors properly on the s3, put the heater blower back in, found one of the windscreen to bulkhead hinge bolts and put it on

Zigster · Aug 2, 2015

Treated my self to a new DAB stereo and spent the afternoon/evening looking like I'd been self harming thanks to threading the DAB antenna and handsfree mic wires under the dash etc

Animal88 · Aug 3, 2015

Went billing yesterday got a good few bits and now have a complete nose back on my D1 with noo grill and light surrounds and a noo winch bumper. Got a replacement dash clock and drivers wing mirror as mine wobbles about so I have no idea what's next to me. Noo central locking box and fob so I will hopefully have my remote locking back. So plenty of things to tinker with.

honolulujoe · Aug 3, 2015

bodged the s1 exhaust with a bit of wire coat hanger as a bracket and some chemical metal to hold the two bits together after the back bit fell off

Tonym3 · Aug 3, 2015

Thanks to fellow Landyzone members I received my new side panels with windows and arranged to collect my new rear seats, just waiting on the seat base then it will be a ha trick of successful Landyzone puchases!
Much better than EBay !!

Brown · Aug 3, 2015

I had a new pressure washer delivered and have spend a happy hour or so hosing the underside of my Defender. It's much better than my old one and has a reel to wind up the pressure hose as well as accessories like an underchassis nozzle and an underchassis lance. So I've got a lot of the congealed oil and road dirt off the underside of the engine and gearbox, which was very satisfying.

Animal88 · Aug 4, 2015

thats something I really need to do.
got the wingmirror fitted tonight only to find that the motors don't work. looks like I'll be making a good one out of 2. oh well more tinkering

XDisco! · Aug 4, 2015

Planning a big trip in a couple of weeks, just ordered these.

Red3439 · Aug 4, 2015

Received my new starter motor, as the previous new one didn't work, so got my replacement, fitted and now been out and taken my Landry out for the day, it was very happy and so was I.

russ.star · Aug 6, 2015

10lts cavity wax
10lts hempel epoxy ( they use it on the oil rigs to stop the rust )
5lts black hammerite

Time to paint the chasis and cavity wax

Grezzer · Aug 6, 2015

Took my Disco1 headlining to be recovered after having both the sunroofs fully and professionally re sealed, and the alpine and anywhere else that is a potential leak risk,

sp00k · Aug 6, 2015

Changed the brake fluid.

Animal88 · Aug 6, 2015

fitted new rear brake calipers and pads and an osr hub seal. anyone had problems with bearmach calipers? mine were 10mm holes when the mounting bolts are 12mm. all fitted now I've drilled them out. just got the front pads to fit now

lcbandit · Aug 7, 2015

just driven her to work, half the ****s on the road must have their eyes painted on!! tried pulling off a slip n no fooker would let me in, nearly side swiped 2! lol I now have an issue with my window though, cos I drove like a proper landy driver with the window down, it won't wind up to the top! job for me in my lunch time

doriz · Aug 7, 2015

Sorted a raft of electrical gremlins and then removed a rear row seat to fix the retaining catches. Just need to re spray the frames and get some staples for upholstery gun.

Chrisw8 · Aug 7, 2015

Cut more bits off it

goonarmy · Aug 7, 2015

Drove accross Kent, Essex and Suffolk and took in some fords whilst doing it.

biggeeeee · Aug 7, 2015

MOT time on Tuesday so my list this week

Front office hub replaced, although nothing showing on dash or Nanocom the wheel had loads of play in it. I also replaced the track bar and track rod ends as they had seen better days.

Anti roll bar bushes replaced as the old ones were showing signs of age.

Had a bit of rough running recently and replaced the injector. Harness and cleaned out the red plug. Also replaced the MAF for good measure.
All had never been replaced before so not bad to get to 160+ thousand miles.

Had a problem with the rest door window that kept coming out its channel. Replaced the channel with a new one and all good.
So tomorrow a clean and tidy and off for a service and MOT

Seen Your Member

Active Member

Well-Known Member

Active Member

Active Member

Attachments

Well-Known Member

Active Member

Well-Known Member

Active Member

New Member

New Member

Active Member

Attachments

Well-Known Member

Well-Known Member

Active Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Beer tester

Retired - Living the dream

Similar threads