Discovered I'd left the ignition on for a few days.
Also discovered my Disco hasn't got enough guts to jump start it in tickover - but I can't be in both at once! :(
I guess I'll just take the battery out and charge it!
 
took the boot microswitch out to find out if there was water ingress, it keeps unlocking itself.
no water at all but boot still unlocks itself:confused: .not only that but it actually opens the boot when you are driving.:eek:
 
Changed the OSR indicator bulb a few days ago. Yesterday, it stopped working again. I've just tried another new bulb and that lasted five minutes. Something is not right here I thought.

I have just tested the new bulb, and that is not blown. Checked the terminals on the loom connector to the bulb holder for voltage - voltage present. Checked the contacts in the bulb holder - voltage present. Tried adjusting the contacts in the bulb holder to no avail. Humph.

Looks like I'll be messing about with the multimeter this evening.
 
Changed the OSR indicator bulb a few days ago. Yesterday, it stopped working again. I've just tried another new bulb and that lasted five minutes. Something is not right here I thought.

I have just tested the new bulb, and that is not blown. Checked the terminals on the loom connector to the bulb holder for voltage - voltage present. Checked the contacts in the bulb holder - voltage present. Tried adjusting the contacts in the bulb holder to no avail. Humph.

Looks like I'll be messing about with the multimeter this evening.
I had the same symptoms.

I traced it down to a contact in the lamp housing that the bulb holder connects to being burnt out - little square of metal burnt away. Its very difficult seeing up there through the access hole in the wheel arch. I poked a camera up there and took loads of pics to try and see what was up. The 'best' pic I got is below.

I had to remove the bumper so I could remove the lamp. I then filled the burnt out hole with solder. It miraculously held for quite a long time - maybe a year - before it went again. When it went again, I had the parts car, so swapped the lamps over from that.

Indicator.JPG
 
Finished stripping useful goodies off the parts cars to make space for..... Another few!?!

If anyone wants a 3 door shell or even two of them (for free) give me a shout before they get weighed in. Nothing much left on them.
 
I had the same symptoms.

I traced it down to a contact in the lamp housing that the bulb holder connects to being burnt out - little square of metal burnt away. Its very difficult seeing up there through the access hole in the wheel arch. I poked a camera up there and took loads of pics to try and see what was up. The 'best' pic I got is below.

I had to remove the bumper so I could remove the lamp. I then filled the burnt out hole with solder. It miraculously held for quite a long time - maybe a year - before it went again. When it went again, I had the parts car, so swapped the lamps over from that.

View attachment 234435
I've just had a check. It seems there is continuity between the live and earth in the bulb holder connector. I guess I'm looking for a chafed bit of wire?
 
I've just had a check. It seems there is continuity between the live and earth in the bulb holder connector. I guess I'm looking for a chafed bit of wire?

Not necessarily. All that means is the bulb on the other side is giving a low resistance path for you meter. ;)
 
Tonight I started getting the fuel system of the V6 back together, as the new fuel rail O rings arrived.
Screenshot_20210329-203427_Gallery.jpg
An hour or so later, I had the engine assembled enough to be able to test start the engine, which it did promptly. :)
Screenshot_20210329-203414_Gallery.jpg

Now just need to do loads of cooling system bleeding, and hopefully it'll be ready for sale.
 
Not necessarily. All that means is the bulb on the other side is giving a low resistance path for you meter. ;)
Yeah, as usual, you're spot on. After a bit of head scratching and hunting around for dodgy connections and a decent earth point I went back to basics. Took apart the bulb holder and bent the outer contact inwards a bit and SUCCESS!
 
I miss that engine, in a masochistic kind of way.

Working on it has been brining back fond memories of when I rebuilt the top end, and fitted it into this very vehicle, all the way back in 2012.

It always amazes me as to how quickly it starts, now it's had some TLC, considering it wouldn't start without a sniff of easy start when I bought it home. :oops:
 
Got the V6 cooling system bleeding done, then discovered a fuel leak from the even (rear) bank fuel rail end cap.:mad:
So I had to strip the rear rail off, so I could check and re-seat the rail O rings, and reassemble the engine again, this no fuel leak was evident. :) Let's hope it stays that way, as there's someone coming to look at it tomorrow.

I also took delivery of this.
20210330_211436.jpg
20210330_211519.jpg
20210330_184229.jpg

It's a very low (8900) miles cylinder head for my FL2, which is showing absolutely zero wear on the valve gear.
Unfortunately it's 8 months too late, so I'll have to get the engine apart for the second time in a year:mad:, but once it's on, at least I'll have a nice quiet (no tappet noise) and hopefully slightly less lumpy running FL2.:D
 
Last edited:

Similar threads