Fitted my 225/75/16's and got a 35mm lift for free
:nopics::nopics:
:nopics::nopics:
Freelaner
Landy Driver
IndiTd4
Well-Known Member
A couple more jobs and one I couldnt manage..
New Red Silicone Hoses all round..
A Bit of a clean up under the bonnet,,
Begining to look how she should now,,
The Job I couldn't do was to undo the old Tow Bar,,
WOW!! that's done up tight..any ideas on how to get it undone??
Got some new bits to go on in its place,,but it wont budge..
New Red Silicone Hoses all round..
A Bit of a clean up under the bonnet,,
Begining to look how she should now,,
The Job I couldn't do was to undo the old Tow Bar,,
WOW!! that's done up tight..any ideas on how to get it undone??
Got some new bits to go on in its place,,but it wont budge..
SES88
Well-Known Member
A couple more jobs and one I couldnt manage..
New Red Silicone Hoses all round..
A Bit of a clean up under the bonnet,,
Begining to look how she should now,,
The Job I couldn't do was to undo the old Tow Bar,,
WOW!! that's done up tight..any ideas on how to get it undone??
Got some new bits to go on in its place,,but it wont budge..
Get it on axle stands to give some height and get a breaker bar on it, the extra leverage will help!
What did you do with the section on one of the intake pieces on the left hand side that has the wire going in to it? I cut my new silicone hoses to suit keeping it, but you've just got a straight hose with nowt in the middle...?!
IndiTd4
Well-Known Member
looks nice and clean Indi good job
Thank you very much,,
makes working on it much easier if its clean..
Nodge68
Well-Known Member
I've got an aluminium heat shield that wraps around the front Prop CV joint, this is bolted onto the IRD using the same stud your new bracket is fitted to, presumably to stop the exhaust cooking the grease in the joint.
Freelaner
Landy Driver
Freelaner
Landy Driver
IndiTd4
Well-Known Member
ha ha true
i look like i've been down t'pit every time i do owt to mine
Believe me the oily bits are all still oily..
well what's not all over may hands that is..
SES88
Well-Known Member
Yeah thats what i meant, mine has the sensor, wondering if i shouldve removed it...
IndiTd4
Well-Known Member
Been Playing again,,
Replaced broken passengers side vent,
Replaced old Tax disc holder with smart black one,
Went to the tip 3 times to clear garden mess
Put Black Land Rover badges on, including the Freelander badge..
Went to local Garage to get nuts cracked,,
then I changed the old tow bar for a new one
Old One;
New one;
All finished for today...
Replaced broken passengers side vent,
Replaced old Tax disc holder with smart black one,
Went to the tip 3 times to clear garden mess
Put Black Land Rover badges on, including the Freelander badge..
Went to local Garage to get nuts cracked,,
then I changed the old tow bar for a new one
Old One;
New one;
All finished for today...
IndiTd4
Well-Known Member
I told the wife today and she agrees its a good idea..
Phew!!!
That's one lot of explaining I wont have to do.
Once I have them fitted I will just wait till something goes wrong
to spend some time on it,,
the Freelander is as we want it now..
Off roading is the next thing to convince the wife we should do..
Well some light green laning anyway..
Phew!!!
That's one lot of explaining I wont have to do.
Once I have them fitted I will just wait till something goes wrong
to spend some time on it,,
the Freelander is as we want it now..
Off roading is the next thing to convince the wife we should do..
Well some light green laning anyway..
