mick the builder
Well-Known Member
Cleaned and put sump back on. Changed lift pump. Put all pulleys back on and torqued up. Flushed out rad. Cant believe the rusty water that came out of it. Will put oil in tomorrow, back it out of shed and flush the block out.
mick the builder
Well-Known Member
v8250
Well-Known Member
Well, despite the crazy times we're all experiencing...and I hope you're well...thought I needed to check the condition of the fuel tank. So off with sills both sides, angle grinder and cold chisels out for some of the nuts and bolts. Finally drop the tank and this afternoon buzzed back the tank in prep' of a good zinc etch primer and...I've had an idea!!...I Upol Raptored the whole underside of my V8 MGB Roadster the other year in the same colour as the body, and it's great/tough as old boots. So, I'm going to Raptor the fuel tank, underside and external chassis of the 90. Have found they do spray cans which make life a little easier.
+ ordered new sills, sill rubbers, sill rubber P section, gasket sets & full st/st fixing kit from YRM. Even in these stricken times I only waited 3 days from point of order to receiving the new metalwork - thank you YRM
+ ordered new sills, sill rubbers, sill rubber P section, gasket sets & full st/st fixing kit from YRM. Even in these stricken times I only waited 3 days from point of order to receiving the new metalwork - thank you YRM
Hicap phill
Well-Known Member
mick the builder
Well-Known Member
Torqued up sump, flushed out block, put it all back together and filled with oil. Just got the cooling system to refill and that will be it, hopefully.
v8250
Well-Known Member
Today, I got very, very dirty. Thought it a good idea to prep' the underside of the 90 before treatment and paint arrives. Used the steamer to get everything clean, which was great as now have super clean underside. Only problem...face, fair, overalls, glasses all covered in s**t...though the Landy's underside is very clean
Ps as above, I now have new main body sill rails from YRM. The old ones are really in good condition and too good to throw away...they're free to a good home if anyone would like them. You pay P&P. PM me if anyone would like them
Ps as above, I now have new main body sill rails from YRM. The old ones are really in good condition and too good to throw away...they're free to a good home if anyone would like them. You pay P&P. PM me if anyone would like them
Last edited:
Today, I got very, very dirty. Thought it a good idea to prep' the underside of the 90 before treatment and paint arrives. Used the steamer to get everything clean, which was great as now have super clean underside. Only problem...face, fair, overalls, glasses all covered in s**t...though the Landy's underside is very clean
Ps as above, I now have new main body sill rails from YRM. The old ones are really in good condition and too good to throw away...they're free to a good home if anyone would like them. You pay P&P. PM me if anyone would like them
Damm thought id knocked it off.. im missing the outer n/s sill
v8250
Well-Known Member
Damm thought id knocked it off.. im missing the outer n/s sill
If so, I have both n/s and o/s outer sills available...
Ah ok cool I have a new o/s sill I did have a pair but the n/s one has vanished ??
Do you have both n/s parts
v8250
Well-Known Member
Ah ok cool I have a new o/s sill I did have a pair but the n/s one has vanished ??
Do you have both n/s parts
yes, for both inner sill rails and outer sills - i'm completely refurb'ing the underside and inner wings, fitting new rails complete and a set of HD rock/tree sliders
frog hopper
Well-Known Member
Went out and made sure it was still there. Yes it is.
