Overheated on the way home. Left it to cool down and I'll see what is what tomorrow.

Also, I think the clutch was slipping a little at high torque over thre weekend. That was only replaced 5 years ago with a Valeo one. Could be some oil contamination but I did the rear seal 5 years ago while I had the clutch out. I'm fed up of taking that box out (3 times in 10 years) and seriously considering buying something Jap!

Well, wasted four hours on this today. Coolant was a little low so topped up and then started her. Cannot recreate the clutch behaviour for love nor money and beginning to wonder if I imagined it. Moreover, she won't overheat. Ran her for hours, standing, mix of driving, driving at 3.500 rpm, you name it. Only odd thing is that the temperature needle was at about 11.30 until I stopped and left her running for ten minutes and then after that it was nailed at 12. I guess that means the visxous is working as it roared and then went quiet and I could stop it when it qas quiet. Couldn't get the temperature high enough to lock it again.

My only thoughts are: dodgy thermostat, possibly caused by the overheat when the coolant hose let go last month or possibly the impeller on the water pump shaft may intermittently spin on its shaft causing an overheat. The lost coolant seemed to cone out of the headertank overflow pipe so I am leaning towards thermostat sticking. Of course, the whole system was flushed and new thermostat put in last summer when I put a new head on. Didn't replace the eater pump because I was sent the wrong one (plastic impeller) so put the old metal one back on. I mist have bought that 10 or 11 years ago.

In short, I am clueless until it does it again or gives me sone sort of a clue.
 
Well, wasted four hours on this today. Coolant was a little low so topped up and then started her. Cannot recreate the clutch behaviour for love nor money and beginning to wonder if I imagined it. Moreover, she won't overheat. Ran her for hours, standing, mix of driving, driving at 3.500 rpm, you name it. Only odd thing is that the temperature needle was at about 11.30 until I stopped and left her running for ten minutes and then after that it was nailed at 12. I guess that means the visxous is working as it roared and then went quiet and I could stop it when it qas quiet. Couldn't get the temperature high enough to lock it again.

My only thoughts are: dodgy thermostat, possibly caused by the overheat when the coolant hose let go last month or possibly the impeller on the water pump shaft may intermittently spin on its shaft causing an overheat. The lost coolant seemed to cone out of the headertank overflow pipe so I am leaning towards thermostat sticking. Of course, the whole system was flushed and new thermostat put in last summer when I put a new head on. Didn't replace the eater pump because I was sent the wrong one (plastic impeller) so put the old metal one back on. I mist have bought that 10 or 11 years ago.

In short, I am clueless until it does it again or gives me sone sort of a clue.
Air in the system judging by the gauge behaviour. Unreliable viscous fan, the bi-metallic coil at the front drives a shaft that operates the storage valve, the shafts are known to stick.
 
Bl**dy RAVE has stopped working on my Win 10 laptop, AGAIN. Compatibility settings no longer allow NT. PITA. Seems to be blocking Adobe 4.0 from working.
 
Wife took the spare key to the garage and he worked perfectly. So despite the battery testing okay and broadcasting a signal it obviously wasn't quite good enough to work the system.
So will now be sourcing new batteries for both fobs - tidser 1220 in there.
Passed the MOT with some advisories - start of leak on left rear shock and, you'd never guess, oil leak on engine.
New fuel pump fitted but the lines were corroded and damaged so also being replaced. Should be able to collect him tomorrow with luck.
 
Wife took the spare key to the garage and he worked perfectly. So despite the battery testing okay and broadcasting a signal it obviously wasn't quite good enough to work the system.
So will now be sourcing new batteries for both fobs - tidser 1220 in there.
Passed the MOT with some advisories - start of leak on left rear shock and, you'd never guess, oil leak on engine.
New fuel pump fitted but the lines were corroded and damaged so also being replaced. Should be able to collect him tomorrow with luck.
My engine don't leak🤭
No really it doesn't 😝
 
What you guys think, is it worth it.
No.
That one needs work. £40 tops if I was looking for head to do myself. All is worth without sellers personal guarantee to get me another if it is duff
 
Wow, in two weeks I've been offered a 2008 4.2 SC l322 for 2k€ and a 2010 3.0v6d for 8k€, both with gearbox issues... Fûck that🤣

But with Bemble's advice you'd have the SC back up and running in a weekend! Offer 1500!
 

Similar threads