There are two SRS bulbs, if one fails and goes open circuit the other stays lit.
There are two SRS bulbs, if one fails and goes open circuit the other stays lit.
biketeacherdave
Well-Known Member
Fitted my roof box
That's gonna kill your fuel consumption 
Dopey
Well-Known Member
That's gonna kill your fuel consumption
Yea your gonna make that brick less aerodynamic lol
Tenebreaux
Well-Known Member
Just got a phone call from Charles Hurst in Belfast, my new key arrived. Only ordered it Friday. Thank Allah for RAC key cover.
Dopey
Well-Known Member
Allah didnt help my wife.... she married me...
That's what I thought but the one with SRS written on it lighting up had me confused!
Both bulbs illuminate the same area.
Datatek
Well-Known Member
Then it is likely one of the two bulbs has failed.
biketeacherdave
Well-Known Member
I run lpg at 60ppl I dont careThat's gonna kill your fuel consumption
Had a lovely drive back up M1 from East Midlands Airport, Except why is there always a Honda Jazz stuck in 3rd lane doing 60mph causing me to undertake and get gobbed at for being a lout in a Range Rover. I thought this section was supposed to be a smart motorway to sort out this kind of problem. Smart motorway BAH humbug load of bo**ocks
There should be overtaking both sides, end of. It gets ridiculous.
RangeRoller dt
Well-Sprung Member
^^^ +1
We have wing mirrors on both sides these days so makes sense. Most can’t cope with overtaking on one side as is sooo....maybe not
We have wing mirrors on both sides these days so makes sense. Most can’t cope with overtaking on one side as is sooo....maybe not
frog hopper
Well-Known Member
Went to the French version of halfrauds today to get a couple of new wiper blades, sorry don't do that type any more. Oh well, prats only carry stuff for 2 year old euroboxes I guess. Mine is a 1988 RRC (lhd)
Got home and tried to order from the usual suspects. No longer available. Feck. My wiper arms have a flat end with a little dimple on one side.
So thinking about it, I want new wiper arms that are splined push on type with a hook end for mounting the blades, that way I have a choice of blades.
Has anyone fitted the more modern arms from a different vehicle? I'll probably take an arm off and have a look at the nearest motor factor for the nearest in shape and size.
Got home and tried to order from the usual suspects. No longer available. Feck. My wiper arms have a flat end with a little dimple on one side.
So thinking about it, I want new wiper arms that are splined push on type with a hook end for mounting the blades, that way I have a choice of blades.
Has anyone fitted the more modern arms from a different vehicle? I'll probably take an arm off and have a look at the nearest motor factor for the nearest in shape and size.
Totally agree with you get ****ed of swapping lanes to go round the lane hoggers
gold rover
Well-Known Member
Decided to just check she would start, as she hasn't been used for two weeks. There were absolutely no issues. Key in , turned it , and vroom. Just shows after all the issues I had , due to wrong battery, a good battery makes all the difference.
I've got those modern flat things on my p38. Fit fine. Think they're Bosch off Amazon.
frog hopper
Well-Known Member
Well thats just the sort of thing I would like to be fitting, do you happen to know if the arms off a P38 would fit my classic?
Unfortunately not - as in I don't know. I also don't know if the later 92-94 Classic arms would fit.
Mine (1986) have a round section pin that goes vertically down through the wiper blade & clips into the end of the wiper arm - the wiper blade sits vertically on top of the arm so is parallel to the arm not pushed or hooked onto the end of it so are different again from yours.
My arms look like these: https://www.ebay.co.uk/itm/RANGE-RO...776613?hash=item5d900db7a5:g:wMYAAOSwZbFdVWhV
The LRcat pics for your MY do show an arm with a small raised(?) dimple on the end which would engage with the corresponding dimple on the blade:
RTC6787 - BLADE-WINDSCREEN WIPER 'CLASSIC PART' [ - (V)GA413742 ]
PRC6827 - BLADE-WINDSCREEN WIPER [ (V)GA413743 - ]
http://new.lrcat.com/#!/1230/71383/71609/5778/71705
Likely the part numbers have been superceded over the years.
I suspect from online pics that RTC6787 are the same as mine.
Does the clip on yours look like these? https://www.ebay.co.uk/itm/Range-Ro...361503?hash=item4172d3dcdf:g:ZNsAAMXQJ3xRe9gG
Is the metal part of the blade itself in good order & would it be worth just fitting new rubber to them ( usually referred to as refills)? Which is what I often do with our cars.
Mine (1986) have a round section pin that goes vertically down through the wiper blade & clips into the end of the wiper arm - the wiper blade sits vertically on top of the arm so is parallel to the arm not pushed or hooked onto the end of it so are different again from yours.
My arms look like these: https://www.ebay.co.uk/itm/RANGE-RO...776613?hash=item5d900db7a5:g:wMYAAOSwZbFdVWhV
The LRcat pics for your MY do show an arm with a small raised(?) dimple on the end which would engage with the corresponding dimple on the blade:
RTC6787 - BLADE-WINDSCREEN WIPER 'CLASSIC PART' [ - (V)GA413742 ]
PRC6827 - BLADE-WINDSCREEN WIPER [ (V)GA413743 - ]
http://new.lrcat.com/#!/1230/71383/71609/5778/71705
Likely the part numbers have been superceded over the years.
I suspect from online pics that RTC6787 are the same as mine.
Does the clip on yours look like these? https://www.ebay.co.uk/itm/Range-Ro...361503?hash=item4172d3dcdf:g:ZNsAAMXQJ3xRe9gG
Is the metal part of the blade itself in good order & would it be worth just fitting new rubber to them ( usually referred to as refills)? Which is what I often do with our cars.
Last edited:
