codfather79

Well-Known Member

• Aug 28, 2023

• #1

Afternoon landyzoners!
Shirley here, again
Just removed the water pump and have managed to snap a stud
Any ideas on how to extract said stud?
Or am I better off taping out the hole to take a slightly shorter stud?

Thanks in advance for any help

 

codfather79

Well-Known Member

• Aug 28, 2023

• #2

Also, what do we think about this repair!!

A timber plug

 

Shippers

Well-Known Member

• Aug 28, 2023

• #3

Got to do same job soon...going to remove timing cover then weld large washer to broken stud then large nut to washer and broken stud already got crank pully off.

 

H

Hicap phill

Well-Known Member

• Aug 28, 2023

• #4

codfather79 said:

Also, what do we think about this repair!!
View attachment 296475
A timber plug

Click to expand...

Thats a drain hole. They block them off so you don’t know if the pump fails.

 

mystery

Well-Known Member

• Aug 29, 2023

• #5

If you have access to a lathe you could cut the broken end of the removed part of the stud drills pilot hole through the centre and thread it back in the hole and use it as a pilot to centre the drill when you drill the broken off stud.
think the thread is BSF unsure of the size so I would drill just under size of the thread and then tap to the correct size this should break the damaged thread from the wall of the stud hole

 

Attachments

• 
  PILOT HOLE.jpg

  147.4 KB · Views: 103

Last edited: Sep 3, 2023