200tdi ayre said:
i wish !!! haha :D
Click to expand...

Look forward to seeing the next change then, so far the farthest i've got with me disco is removing the LPG and getting a f-ing expensive trailer.....

Roll cage and rear space frame before Easter I hope....
 
Last edited:
Todays mission HD diff pan :)

One hole



One turtle :D





Welded inside and out on the bench then cleaned up and welded on :D




Just gotta drill and weld in a plug and shes done :) 1 more to do :)
 
Rear diff cover done and a frame mount done :)


Yes it is level ;)



Ill send them for shotblasting tomorrow and hopefully have them ready for shafts on wednesday :)
 
Shes beefy :D contemplating wekding a plate under the diff but I might make a bolt on one like yours sam that will help protect the prop too :)
 
discomark10 said:
That bung went in well. I assume you got it centered. Looks like stick weld.
how did you bend the pan?
Click to expand...

Yeah took me almost half an hour to get it centred, I got it to within 2mm straight away that last bit was a pita haha

Yeah bung works well just gotta hope its right as its not coning off now :D

Nahh just thick ass mig, pushing about 180 amps into it shes well penetrated, I veed the sides too so its quite a wide weld :)

The main bit of the pan was 8mm 9 inch tube that we had lying around :) the side parts are 6mm that I bemt with a combination of the press and artistic use of a hammer :p
 
You must log in or register to reply here.

Similar threads

landy-lee
Help me with my 2 door RRC build
Replies
2
Views
1K
landy-lee
landy-lee
M
Discovery1 lt230 in place of LT230R from a 12D?
Replies
3
Views
852
MrF
M
RustHater
Disk upgrade on a 90, can you swap front discs to rear?
2
Replies
27
Views
3K
RustHater
RustHater
D
Stub axle oil seal
Replies
13
Views
2K
Dr Strangeglove
D
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K