block is iron not steel!!!
Ive done ms pipes as a quick get out of trouble and still been ok 5 yrs later:D
 
Winch cleaning / modifying :)
AB396562-56F4-405C-BF3D-CD536C3FE8EC-1879-000001975788089F.jpg
 
Its alright for some who get to work on it avery day and have a full indoor workshop with unlimited resources :p
 
Actually I only work on it at weekends and some nights as I'm usually busy during the week, and I end up fixing all my mates landys aswell

I get one half day each weekend usually if that!

Cant work at night as theres no outside lighting :( no cover either so cant do much if its ****ing it down
 
Yeah but I'm doing a ground up rebuild, your trying to make it run ...

Thats changed now :p mines more or less the same minus bulkhead removal on the front

chassis modifications, new engine, box, seatbox, lighting system, axle, king cab etc

Wasted a lot of time with that buggered up old engine………should have ripped it out and replaced much earlier
 
I have a rollcage :D
90E5A278-5962-43C3-8917-BEE2ADAA7DEC-839-000000E9311C687D.jpg


2EA11478-84BF-4CC0-8EFD-427D52000B29-839-000000E98B9519E5.jpg


Just got to finish the front mounts and finish the rear stays then its just paint :)

Few pics of welds
B9B09AB0-048B-4AD3-BDEE-C5F3F560EBD1-839-000000E9694E353F.jpg


E9E9AB37-278C-415F-9C45-5292728437FA-839-000000E974F5439B.jpg


Cheers :)
 
good lad:D
For the front turn a bung on the lathe out of old hyd ram rod (its en8) and tap it m16
and weld it inside the tube. Then get a cap head bolt because it will fit and you can get a 10.9 tensile bolt that will not break
 

Similar threads