Should I re paint this Range Rover

  • Yes

    Votes: 4 100.0%

  • No

    Votes: 0 0.0%
  • Total voters
    4
  • Poll closed .
Can't believe it's that time of year again. Guess that this is it till October. At least it's in a workshop now and not got to store it under a tarp again.

u2e4yhyd.jpg
 
90truckcab said:
Bloody time goes nowhere mate , be 6 inches of snow soon
Click to expand...

Shhhh, got lots of work on before it gets cold. Could do without breakdowns as well. Part of the header came off and went into the combine yesterday, took 5 hours to strip the combine, remove it and rebuild again. Fecking German crap

te4esevu.jpg
 
stutab said:
Shhhh, got lots of work on before it gets cold. Could do without breakdowns as well. Part of the header came off and went into the combine yesterday, took 5 hours to strip the combine, remove it and rebuild again. Fecking German crap

te4esevu.jpg
Click to expand...
Wow, that's a first.
Used to work after sales support on those things a while back.
Is yours powered by the Mercedes plant or the DD13 engine and how long have you had it?
 
ifloochies said:
Wow, that's a first.
Used to work after sales support on those things a while back.
Is yours powered by the Mercedes plant or the DD13 engine and how long have you had it?
Click to expand...

It's a 09 530 Montana. Got a CAT engine but not a DD13 possibly a DD9 but will look on the engine in a bit. 330hp anyway. The header rams lost pressure somehow and I reversed with the header down to clear a blockage. Next thing I know the warning lights and screen is shouting at me and there is a loud clattering noise. New part was £600 overnight from Germany. We have screwed them down now as well.

4yda3yru.jpg


dygepe7y.jpg
 
Well I got board sat on the tractor and combine so bought a set of 5 Disco steels for the trialer, oh and a full cage to go on to trialer as well from Tornado Motor Sport. Hope to start work on the rangy again soon. Unfortunately I have lost the Disco I bought in the divorce and need to value the Rangy. Any ideas on what it's worth?
 
stutab said:
Well I got board sat on the tractor and combine so bought a set of 5 Disco steels for the trialer, oh and a full cage to go on to trialer as well from Tornado Motor Sport. Hope to start work on the rangy again soon. Unfortunately I have lost the Disco I bought in the divorce and need to value the Rangy. Any ideas on what it's worth?
Click to expand...

Stu are you spinning the disco wheels for more offset?

As for a price? Eek not a lot unless Mot'd
 
I have modulars so might run them on the front of the ccv and rangy for turning and the disco steels on the rear. Thinking of running 205 85 16 on both for added turning. Will only suffer in ruts
 
Pads off. One was warn right down the others weren't to bad. Opened the box of new pads. Then sent the boss away to buy the right ones :eek:

2abugy4u.jpg


gy6amu4u.jpg


y9eqaqa9.jpg
 
All sorted. Wouldn't let me test drive it for him though. :mad: and found a ball joint gone. Although when letting the Jack down the suspension had dropped so had to raise it to remove the trolley Jack.

6uregu9y.jpg


Loads of life left on that one :eek:
 
You must log in or register to reply here.

Similar threads

G
RR 55 plate l322 vogue
2
Replies
30
Views
1K
stuu
stuu
S
Classic 1987 Range Rover Vogue SE auto 3.5L fitted with LPG Park safety
Replies
11
Views
987
norseman
norseman
S
Newbie urgent help supercharged 55 reg problems
Replies
2
Views
542
Grrrrrr
Grrrrrr
P
L322 Flickering rear lights
Replies
18
Views
712
Parkheadbhoy
P
Montyjohn
P38A Corrosion on battery terminals
Replies
5
Views
256
pwood999
pwood999