KillaJoules
Active Member
That must be the fuel vapour condenser you were talking about. I would ditch it.
KillaJoules
Active Member
Cor Blimey Stu, look like you should have just started a new body shell from scratch 
Gonna try Tax my 80" today, bloomin .gov site says it needs an MOT, you would have thought it would have been updated for the pre 1960 motors, mine clearly states 1 Mar 1952 on the V5.
Just in case I am going armed with a V112 MOT exemption form to do battle with the poor chappy sat in his cubicle.
Gonna try Tax my 80" today, bloomin .gov site says it needs an MOT, you would have thought it would have been updated for the pre 1960 motors, mine clearly states 1 Mar 1952 on the V5.
Just in case I am going armed with a V112 MOT exemption form to do battle with the poor chappy sat in his cubicle.
stutab
Well-Known Member
Cor Blimey Stu, look like you should have just started a new body shell from scratch
Gonna try Tax my 80" today, bloomin .gov site says it needs an MOT, you would have thought it would have been updated for the pre 1960 motors, mine clearly states 1 Mar 1952 on the V5.
Just in case I am going armed with a V112 MOT exemption form to do battle with the poor chappy sat in his cubicle.
Ha ha. Good luck, going to use the wheel well now.
KillaJoules
Active Member
Well it's pre disasterred I
stutab
Well-Known Member
Cor Blimey Stu, look like you should have just started a new body shell from scratch
There was one on ebay, brand new never fitted to a chassis, think it went for £1600 ish
90truckcab
Well-Known Member
been down workshop looking at tins of tractor enamel for two weeks now, its bloody ****ed it down every day iv had free , ah well il just have to wire wheel the lot again , il stick to bathrooms this week, least its in the dry
stutab
Well-Known Member
The joys of having a workshop. Think the bathroom should take priority, gives me less ear ache
Need time myself, got a week booked off work to get as much done as I can on the Rangy, also needs to be out of the shed by the friday then will probably be all stop till october but got a few weeks till then
I will see your handy work next weekend
Need time myself, got a week booked off work to get as much done as I can on the Rangy, also needs to be out of the shed by the friday
then will probably be all stop till october but got a few weeks till then I will see your handy work next weekend
KillaJoules
Active Member
The joys of having a workshop. Think the bathroom should take priority, gives me less ear ache
Need time myself, got a week booked off work to get as much done as I can on the Rangy, also needs to be out of the shed by the friday
I will see your handy work next weekend
Hows the bathroom? Spent Sunday with Rob putting electric electrics into the shed
90truckcab
Well-Known Member
Stage 2 now stu, ensuites comin out, thems lookin nice tbh, tis all fiddly stuff tho, had few problems with rayburn along the way, it gets upset when I drain the water down lol. Anyways yer comin up in this rangy next week, can't have much left to do now
90truckcab
Well-Known Member
Yeah no worries, will try and fit a beer in if yer got time , never kno might have me head stuck under the bath still !
stutab
Well-Known Member
I am coming up Friday night so could drop Jack off with mum and dad and make my way to yours.
Got my EFI bits ready, unexpected cost thanks to mousy. Bit of rewiring on few other bits and should be good.
How hot does the air intake bits get? I only ask as I wanted to smarten it up and wondered if I need high heat of just use normal paint
90truckcab
Well-Known Member
That VHT exhaust spray paints only a fiver a can stu, has done well on my petrol exhausts for over 12 month now ,
stutab
Well-Known Member
Got my panels finished tonight and ready to go in, got some pics but phone playing up so will post them another day. It's looking good now though, I can see the end of the welding, just some filling and prepping before painting.
Not looking forward to the engine swap though, hopefully will go well. only time will tell...
Not looking forward to the engine swap though, hopefully will go well. only time will tell...
KillaJoules
Active Member
Looking forward to the piccies Stu.
