oh.......deadlines stink...my boss gave me a week..it will roll out in 6 months after starting...if you reading this barry, thank you for the use of workshop..!
mine out in 3..has to be shaked hands on it....oppss
redoing my paint job...rainbow flake over the red..
by the way , you spell hear here..lol
stutab
Well-Known Member
I would love to do mine at home but don't have a drive or big garden so unless its t&t it can't be there
oh.......deadlines stink...my boss gave me a week..it will roll out in 6 months after starting...if you reading this barry, thank you for the use of workshop..!
mine out in 3..has to be shaked hands on it....oppss
redoing my paint job...rainbow flake over the red..
by the way , you spell hear here..lol
Mine can go back in in September but got to move everything out then back in
and I know I can't spell for sh!t preferred to be farming than at school.
KillaJoules
Active Member
At least he didn't give you a skip
stutab
Well-Known Member
Fixed my welder tonight, would have done more but worked late instead.
Couple of pics of the priming from last time.
Shame I can't work on this during work, this is a little project that keped me busy for a few days.
Pulled this out of the nettles broken, main drive shaft snapped in 2
So we got the grinders out
So all finished the mechanics, 2 new bearings new main shaft and new bolts
Ran it up and all worked well. So backed it back into the barn for a new coat of paint
Just a shame I didn't get any paint for the wheels
Couple of pics of the priming from last time.
Shame I can't work on this during work, this is a little project that keped me busy for a few days.
Pulled this out of the nettles broken, main drive shaft snapped in 2
So we got the grinders out
So all finished the mechanics, 2 new bearings new main shaft and new bolts
Ran it up and all worked well. So backed it back into the barn for a new coat of paint
Just a shame I didn't get any paint for the wheels
stutab
Well-Known Member
Had a night on the welder :mil56:
Quite happy with the results.
Need to finish this bit
Then I started poking in the boot with a screwdriver :mil48:
This is the result :screaming_bug_eye_f
And still need to do the rear body mounts
:Cry::Cry::Cry::Cry::Cry::Cry::Cry::Cry::Cry::Cry:
Get some more gas tomorrow then
Quite happy with the results.
Need to finish this bit
Then I started poking in the boot with a screwdriver :mil48:
This is the result :screaming_bug_eye_f
And still need to do the rear body mounts
:Cry::Cry::Cry::Cry::Cry::Cry::Cry::Cry::Cry::Cry:
Get some more gas tomorrow then
stutab
Well-Known Member
Ye, they not good, but started with gassless so never planned on using them, so close to the end there is no point changing now. All thick metal has been welded with the arc. If I do another project then I will get a midi Argoshild at the start, but think I will save up for a decent welder before the next one though.
90truckcab
Well-Known Member
stutab
Well-Known Member
oooh peach is a nice colour stu !
Was thinking a pastel lemon myself. The way it's going it will be black.
stutab
Well-Known Member
Well, yesterday I spent most of the day rewiring the horse trailer then helped djdommyp and killajoules with the suspension swap on his Disco.
Managed to get a hours work on it though, finished the a pillar, didn't like the quality of the welding on it so fetched this bad boy to re do it.
Got some good welds with that
Did a load of sealing as well.
Put the tunnel in as well, more to get it out of the way than see if it still fit. Think I made the bulkhead tunnel a but wider but should fit ok.
Managed to get a hours work on it though, finished the a pillar, didn't like the quality of the welding on it so fetched this bad boy to re do it.
Got some good welds with that
Did a load of sealing as well.
Put the tunnel in as well, more to get it out of the way than see if it still fit. Think I made the bulkhead tunnel a but wider but should fit ok.
KillaJoules
Active Member
Good to see we didn't waste all your Sunday :-D
stutab
Well-Known Member
A day helping friends is never wasted.
stutab
Well-Known Member
Attacked the boot tonight :mil6:
Started to cut the rot out of the boot, found more than I wanted (sorry no pics)
Luckily I found some panels lying around
Don't know where I got them from
Some of what I needed was rotten so I decided to make good and turn into a full repair panel
Then noticed the time so I will finish it off another day.
Got my roof rack out of the scrap heap earlier
And do I really need to fit this or can I blank off the pipes from the tank?
Started to cut the rot out of the boot, found more than I wanted
(sorry no pics)Luckily I found some panels lying around
Don't know where I got them from
Some of what I needed was rotten so I decided to make good and turn into a full repair panel
Then noticed the time so I will finish it off another day.
Got my roof rack out of the scrap heap earlier
And do I really need to fit this or can I blank off the pipes from the tank?
