KISSMYAURA
Well-Known Member
Just need to mask up and dust so screws get a dose of raptor etc, next Optimil hinges and new NSF door.
You got the same problem as me mud all up the side are them wheel spats sill available that fit at the bottom of arch ?Just need to mask up and dust so screws get a dose of raptor etc, next Optimil hinges and new NSF door.
not sure, have not seen any i like not too fussed about the mud to be honest, more interested in the Gwyn Lewis thing that stops stuff going over yer chassis legs for the front inner arch etcYou got the same problem as me mud all up the side are them wheel spats sill available that fit at the bottom of arch ?
Are the brake pads like the picture on the box??
Think the 90 had them clips on the rearAre the brake pads like the picture on the box??
If they are you want anti chatter springs,them black clips are for the early pads with single nipple in the middle.
Looks good though. Have you also got some brake pipe,you know what’s going to happen when you try to remove from the rear caliper
generic pic, actuals are in light blue on the box end with middle nip...Are the brake pads like the picture on the box??
If they are you want anti chatter springs,them black clips are for the early pads with single nipple in the middle.
Looks good though. Have you also got some brake pipe,you know what’s going to happen when you try to remove from the rear caliper
ha! im sure myne wont stay like that for long, like the leaks its a game of wits lolNice! Mines a little damp. Weep from the rear diff but wont be bothering as itll be changed soon enough.
TX box has a slight weep on the output shaft, I will get to that one!
A few makes that in my opinion are the best quality you can get:
DAYCO or GATES for belts, tensioners, pulleys
LEMFORDER for balljoints A Frame and other suspension parts
TIMKEN bearings and races
SUPAPRO Bushes
OLD MAN EMU Shocks and Springs
PIONEER Brake Hoses
LOF Clutchs SMF Flywheels, Clutch master and slave cylinders
GKN Universal Joints