neilcmusic
Active Member
Im Here!!!! , still getting fixed , garage owner seems to take on large volumes of work and has trouble meeting demand but I still have faith , the reason im not on forum at the moment is that theres nothing to report , dont want to be posting "still nothing" everyday , its frustrating enough as it is , but dont worry ill be back as soon as I know further .Thanks guys , , havent lost faith dont worry.
neilcmusic
Active Member
neilcmusic
Active Member
Its back!!!
Only just picked it up , sounds great, starts first time on key turn,
will update further ,£671.19 in total but sounds like a new engine
however still leaks into the cab when it rains ,was hoping new head would fix that!!
Photos to follow!
Only just picked it up , sounds great, starts first time on key turn,
will update further ,£671.19 in total but sounds like a new engine
however still leaks into the cab when it rains ,was hoping new head would fix that!!
Photos to follow!
honolulujoe
Well-Known Member
whoo hoo 
Land Raver
Well-Known Member
Pleased you've got it back and working again.
liam_italian
Member
Great news
neilcmusic
Active Member
2 wheel cylinders to fix and its in for mot before end of week!
TheDarkPassenger
Member
If it didn't leak it wouldn't be a proper one
neilcmusic
Active Member
wheel cylinders fixed , 1 job left , slight bit of advice needed and then ill leave you all alone , heater valve under bonnet is squirting like a fountain , ive turned it to cold so it has stopped so im assuming it wont come up on mot.
I can get a replacement easy , however , 2 questions , any advice re removing it? not convinced that it is going to turn easily , also have read other thread that says that you need a collapsible washer with new one , are these just ava from plumbers merchant or can I use standard washer , reason for this is apparently if you dont use a washer the valve opening doesnt turn to face cab and falls short.
Thanks
I can get a replacement easy , however , 2 questions , any advice re removing it? not convinced that it is going to turn easily , also have read other thread that says that you need a collapsible washer with new one , are these just ava from plumbers merchant or can I use standard washer , reason for this is apparently if you dont use a washer the valve opening doesnt turn to face cab and falls short.
Thanks
series2steve
Active Member
hiya mate ,no not MOT stuff,i used a plumbers fibre washer, and well done ,in time for summer
