Grimmer said:
Be careful.............. its FULL of Jocks................ I haz seen them:eek::eek::eek::D:D:D
Click to expand...

So it's not just a rumour then
whistler.gif
.

Slime58.
 
Grimmer said:
Going anywhere nice then:confused::confused:
Click to expand...

I'm heading for Glencoe for a few days, probably with an overnighter in The Lake District.
Really looking forward to it.
It'll be interesting to work out the fuel consumption too, I'm guessing around 30/32 mpg.

Slime58.
 
Slime58 said:
I'm heading for Glencoe for a few days, probably with an overnighter in The Lake District.
Really looking forward to it.
It'll be interesting to work out the fuel consumption too, I'm guessing around 30/32 mpg.

Slime58.
Click to expand...

Nice one, I'll be a couple of miles from there on loch Leven when we go camping next month:cool::cool::cool::cool::cool:

Fuel will be there or thereabouts I would have thought;)
 
And a couple more showing all the small stuff that I painted from home,





All this was done just before I set off for Scotland in it!
Report to follow.

Slime58.
 
They are 7.62mm blanks - check the small cap at the bottom end (wide end) and see if it is smooth or has a small dent in the bottom. If the latter then fine but if not I can get rid of them for you.

Tidy job.
 
bluehaze said:
They are 7.62mm blanks - check the small cap at the bottom end (wide end) and see if it is smooth or has a small dent in the bottom. If the latter then fine but if not I can get rid of them for you.

Tidy job.
Click to expand...

Thanks mate.
As for the blanks, they have all been fired, they all have small dents in them.

Slime58.
 
I would love to get a 90 soft top! but would probably get sunburnt all the time.

Great project Im looking forward to seeing it finished
 
johnson1234 said:
I would love to get a 90 soft top! but would probably get sunburnt all the time.

Great project Im looking forward to seeing it finished
Click to expand...

It shouldn't be long now!
Most of the exterior is done, including the roll cage, just got to finish tidying up the interior.
I'll probably not paint inside the thing as I want it to look like it's been somewhere & done some work. It needs to retain a bit of it's history.

Slime58.
 
I have a slight issue that is puzzling me.
I want to open a thread in the 'Wanted' section as I need a small part, but for some reason I am unable to!
Any thoughts as to why?
I assume you have to have a certain number of posts to sell anything, is it the same if I'm hoping to buy something?
This is probably not the place to post this so apologies for that.

Slime58.
 
Slime58 said:
I have a slight issue that is puzzling me.
I want to open a thread in the 'Wanted' section as I need a small part, but for some reason I am unable to!
Any thoughts as to why?
I assume you have to have a certain number of posts to sell anything, is it the same if I'm hoping to buy something?
This is probably not the place to post this so apologies for that.

Slime58.
Click to expand...

:behindsofa: I think its 50 posts;);)

From what I understand buying/selling had to come under the same rules, so you need the set number of posts before you can do either:D:D
Otherwise we'd end up wiv loads of noobs "WANTED............ buyer for all my tatt":rolleyes::eek::p:p
 
Grimmer said:
:behindsofa: I think its 50 posts;);)

From what I understand buying/selling had to come under the same rules, so you need the set number of posts before you can do either:D:D
Otherwise we'd end up wiv loads of noobs "WANTED............ buyer for all my tatt":rolleyes::eek::p:p
Click to expand...


Darn it ................ (now only seven posts to go)
whistler.gif
.

Slime58.
 
You must log in or register to reply here.

Similar threads

BTD1
Paint Code + selling price help!
Replies
11
Views
901
BTD1
BTD1
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S
dag019
Where to buy an old land rover
2
Replies
31
Views
4K
dag019
dag019
A
Buying my first ever Series 1
Replies
7
Views
979
saxavordian
saxavordian
H
My RRC Project
9 10 11
Replies
201
Views
24K
resto_d1
R