Colin from Hull · Jan 27, 2015

hi
I've use my eas software a few times with no problems get good idle straight away, when i recently tried to use it, im getting the green light flickering (green and red) i only get one comm which runs the programme (comm3)

What im i doing wrong, nothing has changed since last time.

wammers · Jan 27, 2015

Bad connection to socket maybe.

Hairy · Jan 27, 2015

i have problem with the comm every time , can use comm 3 then next time i use it have to mess about can be anything from 1 to 5 just have to try each one.

Saint.V8 · Jan 27, 2015

Check your device manager port settings it will tell you which port the adaptor is in!

Colin from Hull · Jan 27, 2015

Hi
I have checked my usb ports, none of them are comm3, and dont run the my programme when selected, but does when comm3 is select.
when rx ans tx are running, it seems as if one is always jumping out of line, hence green then red.

Datatek · Jan 27, 2015

Colin from Hull said:
Hi
I have checked my usb ports, none of them are comm3, and dont run the my programme when selected, but does when comm3 is select.
when rx ans tx are running, it seems as if one is always jumping out of line, hence green then red.

If it worked before, it should work again, are you using the same USB port in the laptop?

chopper007 · Jan 27, 2015

mine did the same, it's an older Belkin lead.. i have a Prolific one which works 1st time overtime...
so could be a driver issue, and or chipset thing...

Datatek · Jan 27, 2015

chopper007 said:
mine did the same, it's an older Belkin lead.. i have a Prolific one which works 1st time overtime...
so could be a driver issue, and or chipset thing...

There are a lot of Prolific adaptors that do not work with the EAS because the are not a full RS232 implementation.

Hairy · Jan 27, 2015

Saint.V8 said:
Check your device manager port settings it will tell you which port the adaptor is in!

Nice one, Thank you, will try and remember that next time i use it.

Colin from Hull · Jan 28, 2015

Hi
Not sure if im using the same usb, i have three within my laptop, should that really matter?
I will try each one in turn and see wheather it solves my problem!

Datatek · Jan 28, 2015

Colin from Hull said:
Hi
Not sure if im using the same usb, i have three within my laptop, should that really matter?
I will try each one in turn and see wheather it solves my problem!

Yes it does matter.

Colin from Hull

Active Member

wammers

No longer with us, RIP

Hairy

New Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Colin from Hull

Active Member

Datatek

Well-Known Member

chopper007

Active Member

Datatek

Well-Known Member

Hairy

New Member

Colin from Hull

Active Member

Datatek

Well-Known Member

Similar threads