When you gonna build something not just clean the garage?
Watch out fellas, here comes Handy Andy with the MDF in readiness to knock it out as a 60 week make over:emps1:
Watch out fellas, here comes Handy Andy with the MDF in readiness to knock it out as a 60 week make over:emps1:
Pikey
Dummy Ejection Facilitator..
When it's safe to fire up the grinder and not have to worry about setting fire to the place. at the moment there's a sofa been foisted on us, that's sitting a foot away from the crossmember.
Still got **** loads of rubbish to move. I emptied a filing cabinet on Monday. Every drawer was full, saved the decent stuff into a cigar box. everything else went to the tip.
Pikey
Dummy Ejection Facilitator..
gemsdad
NOT BOTHERED.
Oh yes it's definately getting sold. Want a CSW.
ok,nice tratter the CSW.
defender11069
AKA Mr cool...
had another go with the wire brush and grinder. patched 2 small holes on the underside of the Passenger side rear rail.
and then cut away the rear passenger side spring hanger.
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]
Ran out of cutting discs.
[/URL][/IMG]
i know the feeling...
Pikey
Dummy Ejection Facilitator..
Have you been talking to Minty
I have been offered another engine lower mileage than mine & out of a reasonably well looked after Disco. If I keep the 110 Then the gearbox & rear axle will need a bit of work. I'll see how I feel when it's finished. But could do with the extra seats as I've inherited an 18 year old daughter
vilguy
Do'er of stuff and the like
oldskool
Well-Known Member
Pikey
Dummy Ejection Facilitator..
Nah I couldn't be that nasty..
Lol
Pikey
Dummy Ejection Facilitator..
the 110 has a seat already that bolts in with its own seat belt. ..bit fiddly but does the job....he wants more seats with a csw which is ok till he can't get plasterboards and a load of work stuff in it so he will then wanna take the seats out
That's what the roof racks for
Pikey
Dummy Ejection Facilitator..
Another day at the office. Made 2 strenghtening plates out of galvy angle iron. cut & bent them to suit curvature of chassis. The welded them in place. Also drilled thru chassis and Button welded them to give a stronger fixing. then cut a plate to fill the hole & did same as brackets Button welded and then seam welded. Needs a final plate making up & folding to cover the hole in the top of the chassis. Also need to turn chassis over to make it easier to weld.. the final plate. So that'll be next Saturdays job then
Last edited:
THEengineer
whatever
the 110 has a seat already that bolts in with its own seat belt. ..bit fiddly but does the job....he wants more seats with a csw which is ok till he can't get plasterboards and a load of work stuff in it so he will then wanna take the seats out
yep can only get 6x3 on a angle in a 110
