Pikey
Dummy Ejection Facilitator..
Please make sure you disinfect them. I'm not sure Wolf realises, that not all clamps are actually for use in S&M games.Or whatever passes for S&M in sunnevershinesland
uke:
Pikey
Dummy Ejection Facilitator..
Well Chassis Sourced and collected. Thanks to BB for driving there & back & supplying Van. and to Channi for turning up at the workshop. Purely so he could give us an hand, get the chassis off the trailer and into the workshop.
So the Strip down and rebuild begins.
Total spend to date:
Trailer Hire Free
VAn Hire Free
Chassis £100
Fuel to collect Chassis £45
Total Spend £145
So the Strip down and rebuild begins.
Total spend to date:
Trailer Hire Free
VAn Hire Free
Chassis £100
Fuel to collect Chassis £45
Total Spend £145
Last edited:
Best wishes.
Keep on with the spendOmeter, be interesting to see how low you can keep it
Keep on with the spendOmeter, be interesting to see how low you can keep it
Pikey
Dummy Ejection Facilitator..
Been down the workshop, to make a start on cleaning it out.
Took some pics of the chassis.
Think it's fair to say the arse is rotten. Loving the filler in this pic
Spring mounting May need a bit of plating.
Got a lovely towhitch off it. fromt plate is about 1/2" thick.
Rest of Pics here.
Chassis Replacement Photos by redhand010 | Photobucket
Took some pics of the chassis.
Think it's fair to say the arse is rotten.
Loving the filler in this pic
Spring mounting May need a bit of plating.
Got a lovely towhitch off it. fromt plate is about 1/2" thick.
Rest of Pics here.
Chassis Replacement Photos by redhand010 | Photobucket
Whats the plan now?
Shot blast, repair it then galv? Or you you just gonna freshen it up and do it all over again in a couple years on a brand new galvo marslands?
Shot blast, repair it then galv? Or you you just gonna freshen it up and do it all over again in a couple years on a brand new galvo marslands?
Pikey
Dummy Ejection Facilitator..
Repair chassis, swap everything over sell it. And buy a CSW
Pikey
Dummy Ejection Facilitator..
Will you be checking the CSW chassis with the regulation toffee hammer ?
Oh yes and I won't be buying blind off ebay.
blue beasty
Leaks an prone to bits dropping off
Oh yes and I won't be buying blind off ebay.
After we've sorted the chassis properly and swapped everything over I'd be tempted to keep it if I were you.
After all.....
You'll never recoup the labour cost
Pikey
Dummy Ejection Facilitator..
You'll never recoup the labour cost
It's ok I'll just sell all them fecking gearboxes and axles you've piled up in the middle of the fecking workshop.
Pikey
Dummy Ejection Facilitator..
I've been down workshop today to get rid of a load of ****e and make some space. 3 trips to tip in the fiesta. and ya can't even tell I've made a start.
Had to drag 4 gearboxs 2 complete axles a transfer box and a pile of props, steering bars etc half way across workshop & stack em out the way in the corner.
Anyone wanna buy a 300TDI rear diff, lt77 Disco Gearbox or transfer box off a 300TDi disco??
Had to drag 4 gearboxs 2 complete axles a transfer box and a pile of props, steering bars etc half way across workshop & stack em out the way in the corner.
Anyone wanna buy a 300TDI rear diff, lt77 Disco Gearbox or transfer box off a 300TDi disco??
Jonnyb1990
Well-Known Member
How many miles has the disco gear box and tranny done ?
Need something thats done less than 250k
Need something thats done less than 250k
marccleave
Active Member
And this chassis is better than the current one?
Pikey
Dummy Ejection Facilitator..
And this chassis is better than the current one?
Feck yeah. Only 25% of this one needs replacing. As opposed to 95%, of the current chassis.
channi
Active Member
Why didn't you use you're hi lift pikey it would have been easyerAnd getting that chassis up on them Blocks on my own was a right ball ache.
Pikey
Dummy Ejection Facilitator..
Used a 2T trolley jack and several wooden blocks Hilift just pushes the chassis across the garage as it swivels around.
