HI
thank you all for your help yet again, but i appear to have the manuals you have but just go around in circles, I need a wiring diagram for the ABS system, ive had one just showed me a picture of where stuff is located but no Diagram, i need it from the pump through the master cylinder through the clocks and to the abs/ traction module ecu, at this rate i'll go buy a Haynes at least they give you a clue. Maybe im used to quality motorcycle workshop manuals that give you all model and year info in the back that even a beginner like me can follow. Ive now found a dodgy brake light switch which is being sorted on the 3rd, could this be confusing the system? and yet to be fully investigated do to bad weather, there are two wires going from the battery terminals all the way to the back of the car and vanish somewhere above the exhaust but do look like they are heading to rear end lighting. the N/S/R tail light does sometimes flash up on the display but bulb not blown and connection seems okay, then it works again!! suspect these extra wires are to do with this.
Another good one is that every now and then it flashes up on display GEARBOX but its that quick you cant read what comes after that, drives fine, I changed the gearbox oil and filter when I got it, it just flashes up when ever it pleases, not very often but there annoyingly. I pressume nobody has ever developed a stable electronic system for these, as it seems a very over complicated system and they aint getting any younger like me!! soon there wont be any left on the road because the electrical gremlins wont let them work
Cheers
Maxderby
Yes I use it on Mac & Windows regularly. It can work on Ubuntu Linux, but it's a real faff to do & would not recommend unless you're used to Linux.The wiring diagrams are in a separate section of RAVE, down near the bottom of the selection list on the left. There are different manuals for each year. A Haynes manual would have less, not more information. In that same section it also has pictures of what each connector looks like and its location in the car. There is no more complete reference guide, that's what everyone is trying to tell you. You can supplement it with YouTube videos and what people know on here but RAVE is your first port of call. It can be tricky on new Windows machines and Macs but most people have got it running on most machines by now (not sure about Linux or Unix machines).
The RAVE circuit diagrams are large and clear, just spread over many pages, as good as any I have seen.HI
thank you all for your help yet again, but i appear to have the manuals you have but just go around in circles, I need a wiring diagram for the ABS system, ive had one just showed me a picture of where stuff is located but no Diagram, i need it from the pump through the master cylinder through the clocks and to the abs/ traction module ecu, at this rate i'll go buy a Haynes at least they give you a clue. Maybe im used to quality motorcycle workshop manuals that give you all model and year info in the back that even a beginner like me can follow. Ive now found a dodgy brake light switch which is being sorted on the 3rd, could this be confusing the system? and yet to be fully investigated do to bad weather, there are two wires going from the battery terminals all the way to the back of the car and vanish somewhere above the exhaust but do look like they are heading to rear end lighting. the N/S/R tail light does sometimes flash up on the display but bulb not blown and connection seems okay, then it works again!! suspect these extra wires are to do with this.
Another good one is that every now and then it flashes up on display GEARBOX but its that quick you cant read what comes after that, drives fine, I changed the gearbox oil and filter when I got it, it just flashes up when ever it pleases, not very often but there annoyingly. I pressume nobody has ever developed a stable electronic system for these, as it seems a very over complicated system and they aint getting any younger like me!! soon there wont be any left on the road because the electrical gremlins wont let them work
Cheers
Maxderby
Hi
many thanks to you all again. the pdf files much appreciated, the drop down menu which starts with car park, how do i get there? as i say I appear to go around in circles, Im on windows11, beginning to think my disc is corrupt or not complete
many thanks
Maxderby
RAVE runs fine on Win 10 in Win 98 compatibility mode even on my touch screen tablet.You've just said Windows 11, which might be part of the problem. It needs an old version of Adobe (4?) and may need to run in compatibility mode for Windows 98 or maybe XP. May also need to run as Administrator when you run from the RAVE icon. Others who have done it will know more.
When you start RAVE, you should get a frame with the models covered, click on the model you require which will give you the first of the menu's I posted earlier. From there you an select from the menu what you require.Hi
many thanks to you all again. the pdf files much appreciated, the drop down menu which starts with car park, how do i get there? as i say I appear to go around in circles, Im on windows11, beginning to think my disc is corrupt or not complete
many thanks
Maxderby
I still cannot get Rave to run on Win 11 and I have tried all the usual "compatibility mode" wheezes.You've just said Windows 11, which might be part of the problem. It needs an old version of Adobe (4?) and may need to run in compatibility mode for Windows 98 or maybe XP. May also need to run as Administrator when you run from the RAVE icon. Others who have done it will know more.
I'll have to try is on wife's Win 11 pooter.I still cannot get Rave to run on Win 11 and I have tried all the usual "compatibility mode" wheezes.
I have 4 computers that Microshyte have made obsolete with their updates and 6 televisions rendered useless by the switch to HD plus three satellite TV receivers, what an horrendous waste.many thanks
technology updates eh!! half of the stuff in my house dont work anymore due to upgrades, i'll keep trying
thanks
Maxderby
Have you tried printing anything else to prove the printer set up is OK? You could use Windows SNIP to copy the pages you want into a text document and then print that.hi
trying to print off the PDF files that PWOOD999 kindly sent but guess what, computer just wont let me print them!! no matter how i open them it just wont have it, ive a brand new printer so that should be okay, ive tried copying them to a memory stick which its done but then still cant print them from that, think im gonna go back to an old vauxhall viva you could work on those really easy
cheers
Maxderby
many thanks
technology updates eh!! half of the stuff in my house dont work anymore due to upgrades, i'll keep trying
thanks
Maxderby
Microshyte have announced the end of support for Win 10 next October What is more, they say my recently purchased core i3 desktop PC will not work with Win 11 although wife's core i3 laptop came with Win 11One reason I refuse to upgrade and am hanging on for dear life to Windows 10. Micro$hite bricked 3 laptop drives with updates and I do not believe it was accidental.
To print try CTRL+P
Just treated myself to new PC for Christmas and had choice of Windows 10 or11. Plumped for 10 as I new I could get most of my software to run with a bit of tweeking. My old windows tablet and laptop for running eas software are disconnected from internet so as not to update after wifes laptop got ruined by updatingMicroshyte have announced the end of support for Win 10 next October What is more, they say my recently purchased core i3 desktop PC will not work with Win 11 although wife's core i3 laptop came with Win 11
I stayed with XP for years, I missed out on Vista and 7 but eventually had to move to 10 because my bank denied access on XP due to so called "security issues"Just treated myself to new PC for Christmas and had choice of Windows 10 or11. Plumped for 10 as I new I could get most of my software to run with a bit of tweeking. My old windows tablet and laptop for running eas software are disconnected from internet so as not to update after wifes laptop got ruined by updating