freelandermad
New Member
ive ordered a obdll plug & db9 to make a cable & have software ready to go once i receive the db9 to unlock the EAS.
Anyways in meantime....fitted a manual inflation kit.... 4 t's to each valve in compressor block and to each airbag, 4 elbows to the valves to inflate & unplugged eas relay under passenger seat....nice coloured nylon pipe (looks very colourful under bonnet have to saylol) all good so far??
Now..my question is.... setting the RR to 20" at the rear & 18.5/19" at the front....why does the rear passenger airbag continue to inflate when i'm blowing up rear drivers side..... fronts seem to be fine when inflating both corners & only seems to happen to the rears when inflating they corners
Any advice appreciated or pointers
Anyways in meantime....fitted a manual inflation kit.... 4 t's to each valve in compressor block and to each airbag, 4 elbows to the valves to inflate & unplugged eas relay under passenger seat....nice coloured nylon pipe (looks very colourful under bonnet have to saylol) all good so far??
Now..my question is.... setting the RR to 20" at the rear & 18.5/19" at the front....why does the rear passenger airbag continue to inflate when i'm blowing up rear drivers side..... fronts seem to be fine when inflating both corners & only seems to happen to the rears when inflating they corners
Any advice appreciated or pointers