wammers · Mar 31, 2015

freelandermad said:
Well i've went down the 2 valve inflation method in meantime....(know wammers will like ma post lol)

Got it sitting at around 20" all round from middle of wheel to arch at approx 65psi all round and 44psi in each tyre

*Hopefully* the db9 gender changer will arrive tomorrow (bought wrong fitment hence the F2F gender changer & USB adapter) so i can unlock the eas, already made the obd cable up & balls it up altogether lol (joking)

wammers...any tips on what to do with the eas unlock??....better to deflate it all back down to bumpstops or anything you suggest please would be appreciated?
Or anyone else got experience of best thing to do?

Attached piccy of how it looked prior to day i jump started it

Tyre pressures are way to high. 20" from centre of wheel to arch lip is to high should be 475 mm at standard ride height. With tyre pressures like that and 20" set on height you will rattle your fillings out, hope you know a cheap dentist. Read my EAS "How to" for how to check things, find out if any faults recorded on EASunlock and post them on here.

freelandermad · Mar 31, 2015

tomcat59alan said:
Shouldn't your tyre pressures be 28 front, 38 rear?

Seriously?? 38 rear yeah i can do that but 28 at front??

freelandermad · Mar 31, 2015

Datatek said:
Start off by reading the instructions for the EAS software, then get the green "Good Idle". Once you have that, read the faults and report back.
Your tyre pressure are possibly dangerous.

Littelwill said:
Those pressures are way out!

wammers said:
Tyre pressures are way to high. 20" from centre of wheel to arch lip is to high should be 475 mm at standard ride height. With tyre pressures like that and 20" set on height you will rattle your fillings out, hope you know a cheap dentist. Read my EAS "How to" for how to check things, find out if any faults recorded on EASunlock and post them on here.

Maybe let 'some' air out then lol..... i'm in scotland...free dental care

wammers · Mar 31, 2015

freelandermad said:
Maybe let 'some' air out then lol..... i'm in scotland...free dental care

What size wheels and tyres are you running?

tomcat59alan · Mar 31, 2015

freelandermad said:
Seriously?? 38 rear yeah i can do that but 28 at front??

That's what the manual says, isn't it light on the steering?

freelandermad · Mar 31, 2015

wammers said:
What size wheels and tyres are you running?

255 x 60 x 18

tomcat59alan said:
That's what the manual says, isn't it light on the steering?

Yeah a bit but i shall adjust according to manual

wammers · Mar 31, 2015

freelandermad said:
255 x 60 x 18

Yeah a bit but i shall adjust according to manual

You can use a little less in the arse end when not loaded to stop it bouncing around. But as Alan says manual says 28 front 38 rear.

freelandermad · Mar 31, 2015

ok... cable done
connected up to laptop..... initialize and starts going 1. 2. 3. 4 then so on 1. FF in the TX screen
but the RX is saying PP....
tried it a few times now and still saying PP

Any ideas?

wammers · Mar 31, 2015

freelandermad said:
ok... cable done
connected up to laptop..... initialize and starts going 1. 2. 3. 4 then so on 1. FF in the TX screen
but the RX is saying PP....
tried it a few times now and still saying PP

Any ideas?

Don't use EASunlock anymore. Read the instructions.

freelandermad · Mar 31, 2015

wammers said:
Don't use EASunlock anymore. Read the instructions.

I did read instructions...hence why i said i changed com ports etc....
Its my laptop that isnt allowing it to be used...it works fine on desktop both tx & rx....
looks like i'll have to humph desktop out to RR

tomcat59alan · Mar 31, 2015

freelandermad said:
I did read instructions...hence why i said i changed com ports etc....
Its my laptop that isnt allowing it to be used...it works fine on desktop both tx & rx....
looks like i'll have to humph desktop out to RR

Humping your desktop, stop downloading porn you perv.

freelandermad · Mar 31, 2015

tomcat59alan said:
Humping your desktop, stop downloading porn you perv.

humpHing it.... :censored: lol

freelandermad · Mar 31, 2015

right a wee screen shot.... managed to get the cable recognised on an old desktop.... but have a look at the RX part.... its not connected upto RR yet...just cable whapped into the port etc

tomcat59alan · Mar 31, 2015

freelandermad said:
right a wee screen shot.... managed to get the cable recognised on an old desktop.... but have a look at the RX part.... its not connected upto RR yet...just cable whapped into the port etc

It's showing you have got no idle, you have a comms problem

wammers · Mar 31, 2015

freelandermad said:
right a wee screen shot.... managed to get the cable recognised on an old desktop.... but have a look at the RX part.... its not connected upto RR yet...just cable whapped into the port etc

Are you saying in that screen shot the cable was not connected to the car?

freelandermad · Mar 31, 2015

wammers said:
Are you saying in that screen shot the cable was not connected to the car?

Yeah its not connected in the car wammers.... just got it plugged into old desktop the now

wammers · Mar 31, 2015

freelandermad said:
Yeah its not connected in the car wammers.... just got it plugged into old desktop the now

If it's not connected to the bloody car how can you expect the ECU to give you an RX response?

freelandermad · Mar 31, 2015

wammers said:
If it's not connected to the bloody car how can you expect the ECU to give you an RX response?

Well no that am trying to look silly but..... there is a video on youtube of RSW showing that the EAS unlock will still run without it being connected to the car...hence why i posted up the screenshot of it running without being on the car & also a screenshot of faults without it being in the car lol

Also video below
https://www.youtube.com/watch?v=fJaMareygYM

wammers · Mar 31, 2015

freelandermad said:
Well no that am trying to look silly but..... there is a video on youtube of RSW showing that the EAS unlock will still run without it being connected to the car...hence why i posted up the screenshot of it running without being on the car & also a screenshot of faults without it being in the car lol
Also video below
https://www.youtube.com/watch?v=fJaMareygYM

Yes there is a video of the demo program but the unit itself won't run on it's own. The TX sends out signals the ECU sends responses back through the RX if there is no connection to car it can't send anything back. He is the bloke that designed it that is more than likely plugged into his bench tester.

freelandermad · Apr 1, 2015

wammers said:
Yes there is a video of the demo program but the unit itself won't run on it's own. The TX sends out signals the ECU sends responses back through the RX if there is no connection to car it can't send anything back. He is the bloke that designed it that is more than likely plugged into his bench tester.

Yeah probably I'll update how i get on tomorrow with it... might fit the 19" screen into dash while am at it tomorrow save humphing the whole lot into RR again lol

No longer with us, RIP

New Member

New Member

No longer with us, RIP

Well-Known Member

New Member

No longer with us, RIP

New Member

No longer with us, RIP

New Member

Well-Known Member

New Member

New Member

Attachments

Well-Known Member

No longer with us, RIP

New Member

No longer with us, RIP

New Member

Attachments

No longer with us, RIP

New Member

Similar threads