eye finks we has lost @Flossie and @DevonGuy
Yer evvun loss yer devonguy. Us boys bin zo bizzy us duddun ev taime fer nort cept litter uv cocker pups an wurk. Us gardin be goan tu rack an ruin but us geddin us wurk dun as best us ken. Us Hippocrates (bestest 4x4 int hole whirl evva) be a shainin laight int reliability stakes zo no ztuff tu du there. It be a vull laife but it be gude. Us opin us frenz be zame, vit an elfy an rollin in cream uv prosperrytee.
 
I has also licked many posts, that I don't acherly lick. We needs a nalternative.
@DanClarke .
@My Old Landy
@Stanleysteamer .
Never met any of you. But you is alright by me an I wishes you an yours the very best.
Same goes to the good an kind peeps on this ere fred.

'You has to understand we is here but for a blink of an eye.
Is a miracle we is here it all'

Yes, I has had a glass or two.
So shoot me :p
Bottoms up!
and Ta mate!,
You're OK anorl.
 
Morning all overcast with a tad of blue poking through im wondering if I can take a chance of
getting a bit of fibre glassing done today, says chance of showers. If I dont do it, it will stay dry
& if I crack on id bet it will rain. lol

Anhoo we is getting our replacement fridge/freezer today. :):)

Have a nice quite day peeps. ;)
So "How many ovens you got? " Is going to be replaced with "How many fancy, fuck off huge, Merkin fridge freezers you got?"
Well I'll see your two with my two, (one in each country), plus two smaller chest freezers. Any one raise us?
:D:D:D:D:D

(God do we do some pointless but fun stuff on this fred!!)
 
Last edited:
giphy.gif
I can never see that three-legged image without being reminded of the Ken Dodd joke about the 3 legged chicken.;):):):)
 
Yer evvun loss yer devonguy. Us boys bin zo bizzy us duddun ev taime fer nort cept litter uv cocker pups an wurk. Us gardin be goan tu rack an ruin but us geddin us wurk dun as best us ken. Us Hippocrates (bestest 4x4 int hole whirl evva) be a shainin laight int reliability stakes zo no ztuff tu du there. It be a vull laife but it be gude. Us opin us frenz be zame, vit an elfy an rollin in cream uv prosperrytee.
Cocker puppies are the bestest waste of time ever!!!!!
How many in the llitter?
Our last lot was 7, tons of work but adorable little fings!!!:):):):):)
IMG_2033.jpg
 
Last edited:
Afternoon folks:).

Well more cracking sun and working outside:).
M has been driving the mini digger to move rubble/soil, She's doing ok and enjoying it. Might be able to hire her out soon:D:p.

Took the "mud ball" for a ride out this morning to get some Gas for the cookerer, Don't want to run out mid roast:D.

Tomorrows work list has been made, its a short 1 we have GP & F1. Lets see how much I can knock off before I quit:oops:.

Well the peeps were out running the wire on the posts today, I give it a couple of days before somebody drives a bike/car through it. They have fenced the access to quite a well used track. The village lads also ride their bikes in the area:eek::eek:, could be some entertaining viewing:D.

J
 
Well the peeps were out running the wire on the posts today, I give it a couple of days before somebody drives a bike/car through it. They have fenced the access to quite a well used track. The village lads also ride their bikes in the area:eek::eek:, could be some entertaining viewing:D.

J
Set up a nature cam like @Hippo has, should catch the action!
 
...A little bit of progress to help alleviate the doom & gloom.
I welded the hub-mounting tabs to the axle inserts (one yesterday, and one today).
With the axle fully collapsed I have a track width of around 23 & 1/2 ", so it is narrow enough to go through my side gate.

20210911-133430.jpg



With it extended out to have only 1/2 the tube of each half-shaft engaged in the main tube I get a track of over 31.5".
As it can be adjusted and index pinned wherever I want to make holes for the index pin I will be able to have it adjustable in increments to suit my needs.

The outer tube is 18" long and each "Half-Shaft" goes in around 9" fully collapsed and only 5" in when fully extended.

I was concerned about some apparent toe-in issues but to be honest is doesn't look that bad to me at this stage for either toe-in/out or camber.

20210911-134324.jpg
 

Similar threads