....I've got all the bits for the MIL's bathroom re-furb.
I also took the opportunity to get a new valve for our kitchen-tap (now fitted), and a new toilet cistern flush unit and close coupled donut & plate because mine is a bit dodgy in my downstairs bog.
So, instead of the plumbers quote of £3k for a complete rip out & replace the expenditure is £320 + my and the good BIL's time.
 
Sat in the sun waiting to be loaded.
ED6A6C07-4C8C-4290-87B1-15524CA3F0B6.jpeg
 
DanClarke said:
....I've got all the bits for the MIL's bathroom re-furb.
I also took the opportunity to get a new valve for our kitchen-tap (now fitted), and a new toilet cistern flush unit and close coupled donut & plate because mine is a bit dodgy in my downstairs bog.
So, instead of the plumbers quote of £3k for a complete rip out & replace the expenditure is £320 + my and the good BIL's time.
Click to expand...
Great!:):):)
 
Afternoon folks:).

Well piece has just been busted, the girls are back:).
Done me jobs so tools ready for tomorrow's trimming of stuff;) & more. Salmon out of the freezer and spuds prepped ready to go on when I am instructed;).

Got me skinny dip in while they were out too:D:D:D.

Still scorching here, so it needs to be a reasonably early start in the morning, as the plan is to quit when too hot and put the chicken on the BBQ:D.

J
 
......that I completed my little Tiltometer project on the "how-do-I-know" microcontroller.
MPU Gyro, SD-Card, RTC all working how I wanted it to. Output of timestamped readings to the SD card.
Card then read into Excel spreadsheet on PC, all fine. :)
It has been a bit of fun. :D I may think of other little things to make.
 
DanClarke said:
......that I completed my little Tiltometer project on the "how-do-I-know" microcontroller.
MPU Gyro, SD-Card, RTC all working how I wanted it to. Output of timestamped readings to the SD card.
Card then read into Excel spreadsheet on PC, all fine. :)
It has been a bit of fun. :D I may think of other little things to make.
Click to expand...
That is a fantastic achievement Dan. A suggestion to further enhance things, use SHARP 2Y0A21 proximity sensors around your trike to check how close traffic is? You could wire in an audible warning if too close :)
 
marjon said:
What do you care you is off to sunny Frogland:)

Thought we weren't going to see you today, what time you leaving? please don't say there's a hitch in the plan.

J
Click to expand...
We allus take the overnight to get a nice early start in the morning.
Used to do it in one day, when I was working as that gave us an extra day there, but now no need so overnighting in Limoges.
No hitches so far but don't want to put the fluence on it, crossed fingers etc. ;););)
Leaving our place early as we expect everyone is going to take a lot longer to get through the ticket barrier. And with dogs we expect it to take even longer.;)
 
You must log in or register to reply here.

Similar threads

H
Defender battery - what I fitted
Replies
8
Views
866
johnlad
johnlad
G
48V Alternator run off the PTO to supply a big battery bank and inverter?
Replies
5
Views
1K
SteveMarquis
SteveMarquis
R
Am I mad for buying another Disco 4?
Replies
9
Views
1K
lynall
L
A
L322 L322 V8; Clicking noise (like a relay) from passenger side
Replies
4
Views
646
biketeacherdave
biketeacherdave
TITCH SANDERS
P38 Manual seats to Electric (again)
Replies
19
Views
1K
TITCH SANDERS
TITCH SANDERS