The horn on my 93 classic won't work. I've checked the horn itself and I've looked inside the switch. The contacts shut ok when I bridge across the pins but one of the two pins that are the horn has no feed and I've no diagram to show me what's what. Anyone got a diagram or is a wheeze on these switches? Cheers.
have yu downloaded a Rave manual?
al-one-arm
Well-Known Member
the reason i deleted the previous reply is that i have found out that on my 95 rangie they have incorporated a relay into the circuit therefore if your 93 is wired the same you will not have a permanent supply
the horn is still operated by the earth, but its through the relay
the horns are permanently earthed the other wire goes up to a relay output
when pressing the horn it supplies an earth to the relay , energising it and allowing current to go through the relay contacts, putting power to the horns
the horn is still operated by the earth, but its through the relay
the horns are permanently earthed the other wire goes up to a relay output
when pressing the horn it supplies an earth to the relay , energising it and allowing current to go through the relay contacts, putting power to the horns
