No pics, yet I will dig them out tomorrow and give them a wipe over I got them for my 80 inch but i layed thm in and they were too big to fit in a little 80 inch. They would fit perfect in an 88 or 90 but 80 inch its just too tight. Probably around £50 ish for both theyre actually rage seats theyre soaked just took a pic been in my shed guee i need to re felt that then!!

will post a pic in a mo
 
Nice one I am interested in them to go in my 90, are they comfortable or just like sitting on a plank of wood?


I really wanted top use them in the offroader can't say ive used them i got them to fit but only ever sat on the seat box for a week or two whiilst I tried my hardest to get them to fit but no luck. they came from a 90 a challenge truck being broken up. Can't really comment other than i like them but have zero use for them
 
Right, I found 2 SIII's 88 one truck cab one sw, both 2.5na diesel, the sw had a engin rebuild then did 500 miles would say 70% complete chassis unknown.

Found a SIIA 109 1962 van back, all doors shot this one would take a lot of work but the owner wants to keep the number plate so would give somebody the landy aslong as they do all the work and pay for the plate to go onto retention into his name.

There is a 1988 RRC vogue with a 3.5efi showing 38000 miles, not bad rot, 4 speed auto. Windows left open so inside needs work.

And a 1983 110 3.5v8 van back kitted out for lamping, this one is still in use.

Coulpe of other things as well, will post pictures when I get back to my computer.
 
Last edited:
uploadfromtaptalk1359894971758.jpguploadfromtaptalk1359894992855.jpg
y9uhyza5.jpg
py3une3a.jpg


Bloody phone didn't save the 109 or 110. Will see if my mate got any. I have more pics of these if interested. The Fortrac is petrol and fooked.
 
I want the little blue pick up
I was looking for something like that last summer but gave up and started another project
Now I don't have the space or funds to get one
Il be selling one of my cars this summer but its going to be to late then
Gutted
 
Look worse in the flesh, I would go for the sw over the truck cab. Or get both :D
Would expect to put a new chassis and bulkhead on either..
 
Problem is theyre worth nothing unless you have a bucket loads of cash and lots of time on your hands which quite frankly nobody has at the moment due to the way things are. I do hope you find a home for them as scrapping them would be a real shame but probably the only way to get money from them unless you invest serious time stripping them for parts that now days are hardly worth it.

Just a real shame!
 
Right O,

Today I have been clearing the garden - Woop!
and some work on the offroader:

Well I have mounted my Offside wing which I was dreading... but its mounted up couple more holes to drill and weld the nuts in place,

The bonnet fits dispite being very very close to the header tank and brake servo which is good news! The bonnet has been semi mounted, the rear propshaft has been marked ready to be cut down. The Exhaust silencer has been mounted up and its all looking like it will work out but I do have to change my fuel pump and fuel lines to the outside of the chassis rail, job for another day. The exhaust is a std item!! WOOP so I can replace it nice and easy when needed!! I need a few hours to tweek the Y piece and join it to the rear silencer. Then I can start the thing without it sounding mentally loud!

Loads done today, the boat dinghy thing is on the 90 where it will stay for a while. The 90 is loaded up with some bits for the pub meet seats gas etc,
 

Similar threads