Pikey
Dummy Ejection Facilitator..
Don't get a ****part one.
Don't get a ****part one.
sible88
New Member
Can u not replace the UJ's in yours??
jai_landrover
Well-Known Member
Probably not the same guy but he asked me to look at his wiring in it about 2 or 3 years ago whilst at a petrol station filling up. He said he couldnt get it to work properly. half the loom was house wire and half he cut out an "old land rover" I'm sure there was 6 joints in the ign live to the coil bulkhead side. I said sorry mate I havent got time. I've seen him about he did mention at the fuel station he had a RRC and a series for sale he wanted £800 back then when RRC were £100 specials and the series he said make an offer. I kinda walked away sure ive seen the 110 about now and then. I thought he was more luton way than Tring tho.
stutab
Well-Known Member
No, its an old Keeper, the 110 is a shoot day car and used for lamping, normally drives old l200. He is based in Colney Heath.
I am going tomorrow morning to take pics and find a price. Will post them on hear tomorrow night. I will be at the pub on Wednesday.
Anybody interested in a old Jag or Fortrak? Or any other non landy stuff. These will be picked up by the scrap man and his grab lorry...
I am going tomorrow morning to take pics and find a price. Will post them on hear tomorrow night. I will be at the pub on Wednesday.
Anybody interested in a old Jag or Fortrak? Or any other non landy stuff. These will be picked up by the scrap man and his grab lorry...
jai_landrover
Well-Known Member
Play in splines none/ not alot.
why do you need extra movement?? do you have dislocation cones or do you have longer shocks?
why do you need extra movement?? do you have dislocation cones or do you have longer shocks?
sible88
New Member
Fair enough.
jai_landrover
Well-Known Member
depends how strong fourtrac axles are stock i suspect not very strong tho
sible88
New Member
Fourtrak price? And does it run?
blue beasty
Leaks an prone to bits dropping off
None when greased......if you got rotational/up/down play in the slide you need a new prop
Defenderdog1
Active Member
Jai, how much do you want for the bucket seats and have you got any pictures? Cheers.
Farrar
Well-Known Member
Bit of play in spline. Rear uj a lot of movement. Maybe ill get a new uj and see if it cures the vibration. Its lifted by 60mm
stutab
Well-Known Member
How much do they weigh, how much is scrap price. Then a drink for me and there is the price.
sible88
New Member
Scrap price is about £100-£150 I would of thought?
sible88
New Member
Measure your prop from length to length,
sible88
New Member
Ok cool
