Thank you - helpful to know as in the future I may consider another which could throw this issue up. Mine is a Gems with immobiliser starter full lock out.
Thank you - helpful to know as in the future I may consider another which could throw this issue up. Mine is a Gems with immobiliser starter full lock out.
Datatek
Well-Known Member
All BECM's are normally locked and it is possible to re-sync. However it is possible for the BECM to go into a security locked condition where it cannot be accessed, rick the pick is your man if this has happened.I've tried, but when i try to go into the "advanced settings" it's coming up as lockedwill the Syncmate work around this and re code? really appreciate your help by the way!
You need to either try your Lynx on another car if anyone is willing to let you read the BECM as a test, or better try to borrow a syncmate.
You really need to contact Omitec to find out if your Lynx is supposed to be able to do a re-sync.
chickenboots84
New Member
Nobody's got a sync mate locally. Looks like i'll have to buy one. I'll also be on the phone to Omitec on Monday.
StuckAgainSteve
Well-Known Member
I resynced AP90's 2.5 TD with my Lynx after we had to change the EMS type. You copy the number in the EMS and enter it into the BECM - or the other way round - can't remember now.
Last edited:
Datatek
Well-Known Member
I think it's the other way round, you write the number from the EDC into the BECM
StuckAgainSteve
Well-Known Member
Makes sense - anyhow the Lynx does do it. But it's not a one click operation.
The main P38 omissions from the Lynx capabilities are:-
- Cannot cycle/calibrate blend motors - Omnitec claim to be working on that.
- Cannot edit EAS settings - can only do testbook T4 type full calibration requiring calibration blocks. So Datatek's cable and EASunlock is a must as a Lynx owner unless you have calibration blocks.
Datatek
Well-Known Member
They all work the same way for a re-sync as far as I know, read the EDC, then write the number to the BECM. So at least the OP knows Lynx can do it, just needs to swot up on the user guide.
chickenboots84
New Member
Haha It's cracking me up. When I'm at either code - I press "advanced" and it just says LOCKED.
chickenboots84
New Member
I've come to the conclusion that the Lynx will definitely NOT sync the ECM & BeCM. I've been through the system and instructions, reading every word twice. I've bit the bullet and bought a syncmate. Hopefully that will arrive Tuesday. I have no Disable message on the dash, My key works via RF and I've still got "ANTI THEFT" CODE 27 showing :scratching_chin::frusty:
:scratching_chin::frusty:
I've come to the conclusion that the Lynx will definitely NOT sync the ECM & BeCM. I've been through the system and instructions, reading every word twice. I've bit the bullet and bought a syncmate. Hopefully that will arrive Tuesday. I have no Disable message on the dash, My key works via RF and I've still got "ANTI THEFT" CODE 27 showing
Does the engine turn over but not fire?
I've come to the conclusion that the Lynx will definitely NOT sync the ECM & BeCM. I've been through the system and instructions, reading every word twice. I've bit the bullet and bought a syncmate. Hopefully that will arrive Tuesday. I have no Disable message on the dash, My key works via RF and I've still got "ANTI THEFT" CODE 27 showing
Looking at what Ant posted earlier it won't. A few things it can't do actually. Maybe not the best one to have bought.
chickenboots84
New Member
Yeah engine tuns over, just no diesel from injection pump to injectors.
chickenboots84
New Member
Me neither, I'm officially mined FU$K*D. You're just around the corner in Durham, You haven't got a sync mate have you? lol
chickenboots84
New Member
I really hope so. I've got a couple of Defenders and though I'd try out a P38 (for comfort) looks like she'll have to sit on the drive a few more days. I'll keep you all posted when I try it. Cant wait to hear the old girl fire up and live on!
Had another look at Ants post. It says Lynx can program BECM so if he can read the security code from ECM he should be able to write it to the BECM. So it maybe possible. Whether the BECM is locked or not is of no relevance.
