Shifty1962 · Dec 12, 2014

I have a PressBrake HD front bumper with integrated recovery points in line with the chassis rails and with a centre mounted tow hitch for trailer jockeying in tight spaces.
They are made from 5/8" steel bar curved and welded to the 6mm bumper.
You will pull the chassis apart long before they give way. Cheap and effective.

aaronmorris · Dec 12, 2014

Shifty1962 said:
I have a PressBrake HD front bumper with integrated recovery points in line with the chassis rails and with a centre mounted tow hitch for trailer jockeying in tight spaces.
They are made from 5/8" steel bar curved and welded to the 6mm bumper.
You will pull the chassis apart long before they give way. Cheap and effective.

I was under the impression he was just concentrating on his crossmembers and stopped making these, or at least a while ago I thought he was.
If he's started again then all the better

I like the standard(ish) looking bumpers, but to have one that's strong would be better.

Landyfox · Dec 13, 2014

aaronmorris said:
I was under the impression he was just concentrating on his crossmembers and stopped making these, or at least a while ago I thought he was.
If he's started again then all the better
I like the standard(ish) looking bumpers, but to have one that's strong would be better.

I'm sure Clive shut up shop completely.?!

I always wanted one of his rear X/members. His front bumpers were immense.

If he starts up again I'm top of the list for orders, you lot can bugger off.

aaronmorris · Dec 13, 2014

Landyfox said:
I'm sure Clive shut up shop completely.?!

I always wanted one of his rear X/members. His front bumpers were immense.

If he starts up again I'm top of the list for orders, you lot can bugger off.

I know their was a lot of talk about it, but thought he got another place, but just only concentrating on crossmembers.

Website seems to say so, but I may be wrong and only one man can answer the question properly

Blacksheep Off-Road

Oh and you can be top of the list, I'm skint'ed

pressbrake · Dec 13, 2014

Rosie said:
I need to get some recovery and towing gear on my landy in the new year...

I'm going to get the NAS rear tow step and for the back regular jate rings but for the front I thought these looked quite good or should I just stick some jate rings on the front as well? anyone got them?

Mud UK Land Rover Defender GMB Recovery Eyes

Will be fitting a steering guard at some point, quite like the look of the Flat Dog one that's powder coated black

I'm rubbish making decisions.

mmm a tenners worth of laser cutting and a fiver of paint what a bargain

pressbrake · Dec 13, 2014

Shifty1962 said:
I have a PressBrake HD front bumper with integrated recovery points in line with the chassis rails and with a centre mounted tow hitch for trailer jockeying in tight spaces.
They are made from 5/8" steel bar curved and welded to the 6mm bumper.
You will pull the chassis apart long before they give way. Cheap and effective.

I have one blank of metal left I can fold into a bumper

Other than that they were not economical to make, when I checked I was doing them labour free and sticking a couple of quid towards them

mick the builder · Dec 13, 2014

pressbrake said:
I have one blank of metal left I can fold into a bumper
Other than that they were not economical to make, when I checked I was doing them labour free and sticking a couple of quid towards them

Make them in batches of 10, charge realistic prices, ( even price matching the inferior quality ones just spoken about)and punt them out on here. You would sell every one, because of the superior materials and workmanship, and everybody would be happy.

PS, still after a front winch bumper!

aaronmorris · Dec 13, 2014

pressbrake said:
I have one blank of metal left I can fold into a bumper
Other than that they were not economical to make, when I checked I was doing them labour free and sticking a couple of quid towards them

Ooh, how much Clive? Could be interested

mick the builder · Dec 13, 2014

aaronmorris said:
Ooh, how much Clive? Could be interested

Oy you, you supposed to be skint

Landyfox · Dec 13, 2014

pressbrake said:
I have one blank of metal left I can fold into a bumper
Other than that they were not economical to make, when I checked I was doing them labour free and sticking a couple of quid towards them

Just PM'd you.

Ignore Aaron, he's skint, we all have a responsibility to help he him and keep out of debt!!!

aaronmorris · Dec 13, 2014

mick the builder said:
Oy you, you supposed to be skint

I am

I'm meant to be saving for propshafts, but if this is the only chance then I want one

mick the builder · Dec 13, 2014

See what i mean Clive

pressbrake · Dec 13, 2014

Landyfox said:
Just PM'd you.

Ignore Aaron, he's skint, we all have a responsibility to help he him and keep out of debt!!!

he needs to save up for some dana 60's before the cummins eats the landrover poop!

Landyfox · Dec 13, 2014

Haha...

aaronmorris · Dec 13, 2014

Landyfox said:
Just PM'd you.

Ignore Aaron, he's skint, we all have a responsibility to help he him and keep out of debt!!!

Oi you, I was here first

And I don't do debt, If I can't afford it I don't buy it

If I did my 90 would be on the road by now :crazy:
Sometimes you've just got to spend the bit you do have

aaronmorris · Dec 13, 2014

pressbrake said:
he needs to save up for some dana 60's before the cummins eats the landrover poop!

Haha, Erm... I'll get to that when it happens

But at the minute I wouldn't mind a bumper

Unless of course you'll be making them again in the future

Landyfox · Dec 13, 2014

aaronmorris said:
Oi you, I was here first
And I don't do debt, If I can't afford it I don't buy it If I did my 90 would be on the road by now :crazy:
Sometimes you've just got to spend the bit you do have

Haha..

I never have a little bit to spend, ruddy two delightful little children take care of that.

You need to start rebuilding these as a business Mr, you're very good at it and it would be a shame not to use such a talent productively. Sometimes it's worth taking a risk matey.

mick the builder · Dec 13, 2014

landyfox said:
haha..

I never have a little bit to spend, ruddy two delightful little children take care of that.

You need to start rebuilding these as a business mr, you're very good at it and it would be a shame not to use such a talent productively. Sometimes it's worth taking a risk matey.

+1

aaronmorris · Dec 13, 2014

Landyfox said:
Haha..

I never have a little bit to spend, ruddy two delightful little children take care of that.

You need to start rebuilding these as a business Mr, you're very good at it and it would be a shame not to use such a talent productively. Sometimes it's worth taking a risk matey.

Aye, I can imagine, having a lr is bad enough, never mind 2 kids anorl

And yes, it's what I enjoy, It's something I'm ok at it and try to learn more every time.
So it's a no brainer really, but the risk? Yeah, that's the bit I don't like.

mick the builder said:
+1

I know, I know

maybe one day

Galvernisednuts · Dec 13, 2014

mick the builder said:
Make them in batches of 10, charge realistic prices, ( even price matching the inferior quality ones just spoken about)and punt them out on here. You would sell every one, because of the superior materials and workmanship, and everybody would be happy. PS, still after a front winch bumper!

Anyone got a piccy of this front bumper?

Well-Known Member

Head's a shed

Well-Known Member

Head's a shed

Well-Known Member

Well-Known Member

Well-Known Member

Head's a shed

Well-Known Member

Well-Known Member

Head's a shed

Well-Known Member

Well-Known Member

Well-Known Member

Head's a shed

Head's a shed

Well-Known Member

Well-Known Member

Head's a shed

Active Member

Similar threads