matacaibo
Active Member
They are 225 x 75 x 16's, no wheelspacers but not much clearance between bottom spring cup & tyre, about 14 mm
essexpestcontrol
New Member
so, are these brackets in production now??
and second question, would it fit behind this bumper?
if not, are there any other options
and second question, would it fit behind this bumper?
if not, are there any other options
Winu
Active Member
For early 1.8 and L-series MY'98-00 we currently develop other type of side brackets. 
. I would like to fit it to mine, but some changes are needed.
Cars from MY'98-00 have other (shorter) chassis rails design, lower front crossmember is a little bit different too. Also all pre-facelift bumpers will have winch more exposed than facelift - except V6.
. I would like to fit it to mine, but some changes are needed.Cars from MY'98-00 have other (shorter) chassis rails design, lower front crossmember is a little bit different too. Also all pre-facelift bumpers will have winch more exposed than facelift - except V6.
Last edited:
Winu
Active Member
The main thing is what you can found under bumper.
This one above looks like 1.8/L-series (MY98-00) or one of first batch of Td4 (MY'2001 - have amber indicators too, green gauges with little change of lettering). It have exterior fittings changed for black revisions from later one.
Your clients have amber or clear indicators ?
This one above looks like 1.8/L-series (MY98-00) or one of first batch of Td4 (MY'2001 - have amber indicators too, green gauges with little change of lettering). It have exterior fittings changed for black revisions from later one.
Your clients have amber or clear indicators ?
SES88
Well-Known Member
so it will be only more exposed i think.
I love problems me
Winu
Active Member
They do
as microcat saysMY 98-00 (YA) - Amber indicators all around, gray bumpers
MY 2001 (1A) - Clear front indicators, amber side repeaters, gray bumpers
MY 2002 -(2A)- Clear indicators all around, black bumpers,
There is possibility of accident, and fix with cheaper parts, or someone change it because like it.
Last edited:
matacaibo
Active Member
Kieran, the winch bracket will fit your TD4 in its current configuration, it will be more exposed than on my facelift owing to different bumper shape, it was specifically designed for the Warrior Samurai 9500SD winch, if anyone else makes a Shortdrum winch that may also fit but can't guarantee it. As you can see from the pics the design works a treat, if you want one I have some left
matacaibo
Active Member
Going by your reg thats either an L series Like Lukas has or a 1.8 petrol, the centre part of the bracket which is the winch tray will exit where your number plate is the two side mounting brackets in there current form will not fit, we are working on changing the design of the side brackets to fit your model and eventually all models in the Freelander 1 range. I guess you have looked at the pics of the bracket before it was installed. I have moved my number plate onto the roof rack but when I first installed the winch I made some "standoff" spacers & installed it in front of the fairlead, if you want a bracket just let me knowso, are these brackets in production now??
and second question, would it fit behind this bumper?
if not, are there any other options
