yes nick,i agree not as comfy as the leather! (esp since my drivers seat has sagged so much its like a recaro!)
 
djguy said:
yes nick,i agree not as comfy as the leather! (esp since my drivers seat has sagged so much its like a recaro!)
Click to expand...

The leather seats are still for sale ;)
Although I was thinking about putting them in the 110 but don't want to lose the under seat storage.

On a series note, you won't be wasting time and money modifying it. How nice to have all the hardwork done for you, lucky git.
 
photo-5_zps88c89905.jpg
 
Bit of advice from the more mechanically minded regarding crankshaft pulley, probably going to take me a couple of days as I don't have the correct LR tools and will have to make bits to hold and undo all the bolts, take out rad etc borrow a huge torque wrench ( or grow some huge biceps) is it best to bite the bullet and buy a new one, have seen them on eBay for 300 don't know what make, or been offered a used one which will probably be 75 delivered, or take it to indie LR garage to fit genuine one and hand over £700.
 
From botophucket just hovver on the pic and click on the bottom code, it will automatically copy it then just paste it direct into the reply box here
 
Looks like a nice well spec'd model you got there Guy.
With regards to uploading I use the Photobucket app on the IPhone. Couldn't be simpler.
 
Co-Pang-Yang said:
Looks like a nice well spec'd model you got there Guy.
With regards to uploading I use the Photobucket app on the IPhone. Couldn't be simpler.
Click to expand...

Cheers Chris, just downloaded the photobucket app :) so will try using that from now on! she is a good truck, just need a few things doing, like egr removed & de-cat pipe and turbo/fuelpump tweaking. . top speed is 65 mph ( a bit embarrassing lol
 
wickford90 said:
Bit of advice from the more mechanically minded regarding crankshaft pulley, probably going to take me a couple of days as I don't have the correct LR tools and will have to make bits to hold and undo all the bolts, take out rad etc borrow a huge torque wrench ( or grow some huge biceps) is it best to bite the bullet and buy a new one, have seen them on eBay for 300 don't know what make, or been offered a used one which will probably be 75 delivered, or take it to indie LR garage to fit genuine one and hand over £700.
Click to expand...


If it was me i would probably fit a good second hand one because it would most likely be a genuine part, and they are not really that common to go.

You will also need ERR5992 which is your front seal as it may leak with a different pulley and not worth the risk for how easy it is to change.

If you pick one up and need it fitted feel free to give me a bell and we can fit it down the workshop i have all the tools and dryness you need
 
You must log in or register to reply here.

Similar threads

Freddie17
Kent laning 5th?
Replies
7
Views
1K
Freddie17
Freddie17
dazer200
L322 ABS, HDC, Suspension, Gone ! FIXED
2
Replies
33
Views
8K
Saint.V8
Saint.V8
BulletBrindle
How I fixed my TD5 ECU (maybe worth doing for preventative reasons too)
2
Replies
33
Views
10K
BulletBrindle
BulletBrindle
Grim
Discovery 2 Looking to swap......
Replies
0
Views
1K
Grim
Grim
P
Disco 3 (LR3) Bought A Disco 3 yesterday...haaaalp!
2
Replies
20
Views
3K
hoopfish
hoopfish