RangeRoller dt · Apr 18, 2020

Grrrrrr said:
Tail-gate light?

Think he means access

RangeRoller dt · Apr 18, 2020

Any leaks losing pressure making height increase unobtainable, moreso with weight?

Does boot close properly?

brianp38dse · Apr 18, 2020

Coley53 said:
Sorry to poke me nose in, but have been following this thread in the hope of finding an answer to my eas problem
Just had new airbags fitted last year and it’s been fine.but due to a cooling problem it has only been doing short journeys and now it seems to be struggling to settle on a setting, bottom light (tail gate light constantly on) third light flashing.
However it doesn’t seem to happen when the boot is empty....usually has two big dogs and a wheelchair in.
Any help appreciated.
Sorry, 4.6 petrol (LPGconversion) 2001

If you had new bags due to leaks has the pump been refurbed as it will have worn, for the cost of a rebuild kit it gives you a known good pump.
have you tried running the car with the door open for a while then trying height changes.

kermit_rr · Apr 18, 2020

Still not got to the bottom of why mine doesn't get the 'door open' signal. I've checked the white connectors in the passenger side A pillar and they seem good, no corrosion

Datatek · Apr 19, 2020

Coley53 said:
Sorry to poke me nose in, but have been following this thread in the hope of finding an answer to my eas problem
Just had new airbags fitted last year and it’s been fine.but due to a cooling problem it has only been doing short journeys and now it seems to be struggling to settle on a setting, bottom light (tail gate light constantly on) third light flashing.
However it doesn’t seem to happen when the boot is empty....usually has two big dogs and a wheelchair in.
Any help appreciated.
Sorry, 4.6 petrol (LPGconversion) 2001

Lack of pressure from the compressor, probably worn out feeding leaks in your old airbags. Take a look at Wammers guide in the tech archive and check the compressor output.

Datatek · Apr 19, 2020

kermit_rr said:
Still not got to the bottom of why mine doesn't get the 'door open' signal. I've checked the white connectors in the passenger side A pillar and they seem good, no corrosion

Is that all doors or just one?

kermit_rr · Apr 19, 2020

Datatek said:
Is that all doors or just one?

All doors i believe, including tailgate. The interior light comes on when you open the doors and you get the dash 'key in ignition message' when you open drivers door too, as appropriate, so that side seems ok

wammers · Apr 19, 2020

kermit_rr said:
Still not got to the bottom of why mine doesn't get the 'door open' signal. I've checked the white connectors in the passenger side A pillar and they seem good, no corrosion

One of the connectors is the door out stations Etc interface, the other one is the connection from selector switch to the suspension ECU. Have a look at connectors at drivers side.

Datatek · Apr 19, 2020

kermit_rr said:
All doors i believe, including tailgate. The interior light comes on when you open the doors and you get the dash 'key in ignition message' when you open drivers door too, as appropriate, so that side seems ok

You should not get the "key in ignition" message when you open the door. The little key in detection flap in the ignition lock is sticking and there lies your problem.

wammers · Apr 19, 2020

Datatek said:
You should not get the "key in ignition" message when you open the door. The little key in detection flap in the ignition lock is sticking and there lies your problem.

+1. ^^^^^

kermit_rr · Apr 19, 2020

Datatek said:
You should not get the "key in ignition" message when you open the door. The little key in detection flap in the ignition lock is sticking and there lies your problem.

But the key was in the ignition

Datatek · Apr 19, 2020

kermit_rr said:
But the key was in the ignition

You did not say that

kermit_rr · Apr 19, 2020

kermit_rr said:
the dash 'key in ignition message' when you open drivers door too, *as appropriate,*

Did too

Datatek · Apr 19, 2020

kermit_rr said:
Did too

The best that can e said about that is that it's ambiguous. So you have a fault between the BECM and the EAS ECU.

kermit_rr · Apr 19, 2020

Datatek said:
The best that can e said about that is that it's ambiguous. So you have a fault between the BECM and the EAS ECU.

I'm sorry, I'll make a cake to make up!

Datatek · Apr 19, 2020

kermit_rr said:
I'm sorry, I'll make a cake to make up!

I'll PM my address for you to send the cake to.

wammers · Apr 19, 2020

Datatek said:
I'll PM my address for you to send the cake to.

Is your address still, Keith, half way down to the left. FRANCE.

kermit_rr · Apr 19, 2020

Sounds like mine, halfway up on the left, turn at the pothole, England

Mark Piercy · Apr 19, 2020

wammers said:
Is your address still, Keith, half way down to the left. With his own moat around his house! FRANCE.

Full address

Datatek · Apr 19, 2020

wammers said:
Is your address still, Keith, half way down to the left. FRANCE.

Half way down on the right coming from your end of the world

Well-Sprung Member

Well-Sprung Member

Well-Known Member

Very

Well-Known Member

Well-Known Member

Very

No longer with us, RIP

Well-Known Member

No longer with us, RIP

Very

Well-Known Member

Very

Well-Known Member

Very

Well-Known Member

No longer with us, RIP

Very

Well fumbled member....

Well-Known Member

Similar threads