Coley53 said:
I’ll do both, arthritis and white finger means I can’t do anything remotely ‘fiddely’ and replacing the various O rings definitely comes into that category
Though I’m surprised I’m having this particular problem, its only got 68K genuine miles on and according to the crack I shouldn’t be getting this problem until 100k+?
Click to expand...
Airbags have a design life of 80K miles or 7 to 8 years, when the bags start to leak, the pump quickly self destructs and the valve block also suffers from overwork trying to keep the car level. I have no idea where you got the 100K mile figure from.
 
He’s not saying your thick, he’s saying check the back of the pump has a big filter sticking out if it ;)

Your vehicle is (xx) years old is why it’s gone, pretty good lifespan
 
Google Paulsp38 EAS. He has a website with a good overview of overhauling the EAS.
 
its me again!
if I drop to access, foot on brake to inhibit, then select wade height and remove foot, bags inflate nice and quickly but front left in particular seems to go in fits and starts, like the second hand on a watch.
would this be knackered/seized bushes in the radius arm? is there any way to check them without taking it off? or likely something else? i think the shock is ok
 
kermit_rr said:
its me again!
if I drop to access, foot on brake to inhibit, then select wade height and remove foot, bags inflate nice and quickly but front left in particular seems to go in fits and starts, like the second hand on a watch.
would this be knackered/seized bushes in the radius arm? is there any way to check them without taking it off? or likely something else? i think the shock is ok
Click to expand...
Unless the FL valve is sticking?
See if you can swap the FL and FR air pipes over coming out of the block and see if the behavior pattern moves to the other side. ;)
Deflated of course... I know you know;)
 
Last edited:
kermit_rr said:
its me again!
if I drop to access, foot on brake to inhibit, then select wade height and remove foot, bags inflate nice and quickly but front left in particular seems to go in fits and starts, like the second hand on a watch.
would this be knackered/seized bushes in the radius arm? is there any way to check them without taking it off? or likely something else? i think the shock is ok
Click to expand...

What can the radius arm bushes do to stop the car lifting, it pivots on the rear ones the fronts have no influence.. Make sure the link from radius arm to sensor is free to move and is not tight on it's pivot., bit of rubber lube works wonders.
 
wammers said:
What can the radius arm bushes do to stop the car lifting, it pivots on the rear ones the fronts have no influence.. Make sure the link from radius arm to sensor is free to move and is not tight on it's pivot., bit of rubber lube works wonders.
Click to expand...
thats why I asked :) will check the pivot, thanks you
 
You must log in or register to reply here.

Similar threads

Montyjohn
P38A Adding a valve to manually fill EAS tank and why did my pump fail again?
Replies
14
Views
960
Datatek
Datatek
feyniriel
P38 EAS problems
Replies
18
Views
1K
pwood999
pwood999
K
Is my RR Classic in EAS shutdown?
Replies
12
Views
876
kevleaper
K
Flossie
P38A Eas issues
2
Replies
22
Views
1K
Datatek
Datatek
J
P38A p38 EAS - immediate drop of pressure
Replies
11
Views
627
Mark Piercy
Mark Piercy