Muds said:
It's pretty tight at the end where the house is ...just gotta make sure we don't total their garden fence - it's tight!
I'll do some digging on GLASS see if it's ok to use a Stihl petrol hedge trimmer.
Click to expand...

I started at the house end I couldn't get into the other end builders were parked there, that's what made me think heck that's tight I have a big brush cutter at home I could bring with me has a big metal 4 way cuttings blade
 
Martyn110 said:
I started at the house end I couldn't get into the other end builders were parked there, that's what made me think heck that's tight I have a big brush cutter at home I could bring with me has a big metal 4 way cuttings blade
Click to expand...

Hmm I think we may be talking about a different lane ...will look at the map and send a grid ref?
 
Turboman said:
Like I said, check the website for specials ;) Pretty sure ml3125 was about 7.95 litre last time. And you don't really need the sprayer thingy, an old garden sprayer will do :)
Click to expand...

I do fair bit of rust proofing and my old sprayer is knackered so made sense. I am calling them tomorrow to see if they can do a deal on a job lot of the stuff. I am looking for a tilt ramp to put up at the garage if you know of one :)
 
Jem90 I have found the other one I was telling you about
 

Attachments

  • image.jpg
    image.jpg
    345 KB · Views: 169
Jess0engineering said:
She is getting there now MOT Saturday :) any updates on when the laning will be then guys.
Click to expand...

We will be out in due course, we are all pretty busy atm, lot of farm stuff on here,and I think Muds has to go up North shortly.

As stated before, we never take anyone out unless we have met them face to face first. Date for another pub meet will be posted when we have time for it. Or post up date and location yourself, see if people bite. I am often free evenings myself, and will be away weekend of the 20th and 21st :)
 
Right my little recce crew , are we trying for a full run on the 12 the oct ? If it's a goer then let me know ...if not , we'll go to the disco b/day party in Plymouth.:)
 
Muds said:
Right my little recce crew , are we trying for a full run on the 12 the oct ? If it's a goer then let me know ...if not , we'll go to the disco b/day party in Plymouth.:)
Click to expand...

Yes, we are up for it! KHF anorl. Looking forward to it :)
 
You're more than welcome ....you might need some t cut ..:eek:
Shouldn't be too bad , there are a couple of scratchy bits , but nothing too bad ...:bolt:
 
Muds said:
You're more than welcome ....you might need some t cut ..:eek:
Shouldn't be too bad , there are a couple of scratchy bits , but nothing too bad ...:bolt:
Click to expand...

Ahhh....if only you knew....:D ...Still thanks, we'd like to come out to play.
 
Im popping out this evening with a few local lads mainly to go and scout out a few lanes that haven't been driven in a while and to see if there passable or not. meeting up at St eve around 6 ish if anyone fancies popping along. Note we are only driving one or 2 lanes and walking 2 others as there not passable but will be working on them shortly.
 
You must log in or register to reply here.

Similar threads

G
Top 100 green lanes
2 3
Replies
46
Views
4K
Freddie17
Freddie17
Freddie17
Kent laning 5th?
Replies
7
Views
1K
Freddie17
Freddie17
M
Freelander 2 (LR2) Freelander 2 2007 P042e EGR
Replies
6
Views
1K
Nodge68
Nodge68
J
think have bought a 2 tonne paperweight
Replies
10
Views
993
Stanleysteamer
Stanleysteamer
xDParis64
Hello Again! (SOLVED, Engine replacement)
2 3
Replies
56
Views
3K
xDParis64
xDParis64