C

chu017

Active Member

• May 18, 2023

• #1

I need to enter the EAK on my D2, I have the code.
It has been bobtailed so rear door and boot doors / locks no linger exist.
for the EAK to work all doors etc must be closed.

so with to locks and doors missing will the system think the doors are open or closed?
if it will think them open are there appropriate wires I can short to ground to make it think they are closed?
if so what wires?

 

mystery

Well-Known Member

• May 18, 2023

• #2

when you open the doors other than the drivers door the circuit is earthed so providing the two rear and tail door door cables are insulated the alarm will think the doors are closed PLG via header C0285 to C0660-4 on the 2000 and 2003 body control unit

 

Attachments

• 
  Circuit diagrams 00MY RHD-ALARM.png

  334.6 KB · Views: 96
• 
  DISCOVERY 2 03MY ALARM.png

  381.6 KB · Views: 92

sierrafery

Well-Known Member

• May 18, 2023

• #3

+1 for the above... to simplify: if any door latch connector is unplugged that door is considered closed for the BCU... also for accuracy, the code is EKA not EAK

 

C

chu017

Active Member

• May 19, 2023

• #4

Thankyou both