Datatek
Well-Known Member
Much like the Nanocom then, except you still need a laptop/tablet with the Lynx.
Grit Valve
2000 4.6 Vouge
I did think that in the back of my mind , being that they are all based on the same system
Datatek
Well-Known Member
Think what? VIN locking has nothing to do with the diagnostics being based on any other system it is effectively a stand alone front end software module that reads and compares the VIN.I did think that in the back of my mind , being that they are all based on the same system
Grit Valve
2000 4.6 Vouge
stjohnsmythe
Active Member
+1
cant own a range rover and then complain about the costs that go with owning one
Actually, I've found my old Range Rover surprisingly cheap to run. Although, I commute into London each day by train so not using it much certainly helps. I've owned a few TVRs in the past, try one of those if you want to experience high running costs!!
P38guy
New Member
Actually, I've found my old Range Rover surprisingly cheap to run. Although, I commute into London each day by train so not using it much certainly helps. I've owned a few TVRs in the past, try one of those if you want to experience high running costs!!
I agree with that a pal of mine was unfortunate to own a vixen until it broke him
He was near Blackpool where I think the cars were made
Rob4x40
Active Member
Has anyone tried these units yet?
At £250 direct I'm tempted, but looks from the PDF like HVAC, SRS and Gearbox support is 1998 onwards and mine's '97
It does however say unlocked for one Land Rover 'model' - although VIN used to unlock - that makes me think all P38 HSE's with GEMS in my case...
At £250 direct I'm tempted, but looks from the PDF like HVAC, SRS and Gearbox support is 1998 onwards and mine's '97
It does however say unlocked for one Land Rover 'model' - although VIN used to unlock - that makes me think all P38 HSE's with GEMS in my case...
sas1810
New Member
Has anyone tried these units yet?
At £250 direct I'm tempted, but looks from the PDF like HVAC, SRS and Gearbox support is 1998 onwards and mine's '97
It does however say unlocked for one Land Rover 'model' - although VIN used to unlock - that makes me think all P38 HSE's with GEMS in my case...
It means specific to your car and your car only. It would have to be an open system to do others.
Rob4x40
Active Member
Hrrm, surely that's 'one vehicle' not 'one model'? Might send an email enquiry tomorrow and find out about other aspects too...
StuckAgainSteve
Well-Known Member
Hrrm, surely that's 'one vehicle' not 'one model'? Might send an email enquiry tomorrow and find out about other aspects too...
I'm very tempted myself - looking forward to the answer!
AFAIK any nanocom will read the ancillary systems of other "engined" Range Rovers - it is locked for the engine/emissions stuff. Which is quite useful.
doz
Active Member
Your right. My nanocom actually has three licenses unlocked for the P38. One for body elec, One for the diesel engine and the last one is for the Thor engine. Before I got my license for the Thor engine (I purchased the unit second hand already unlocked for diesels and body elec) I could read the body elec systems ok just got locked out of the engine ECU.
Rob4x40
Active Member
Asked via online contact form at Lynx Diagnostics before work this morning, but as yet no reply. Not a particularly impressive start from a sales/support perspective and potential new customer, new product etc. I'll advise if/when I get an answer - perhaps they're so busy with sales that they've not had time...
rasheed
Well-Known Member
Wow Britpart bashing never gets old! Of course its their own fault, their own brand stuff was really rather bad, especially moulded plastics which were often out of spec. But they listened to the feedback from forums like ours and revamped the product range, specs, sourcing etc. and came back with a 24 month guarantee on most of it but clearly the damage is done. FYI you don't have to buy the own brand stuff, they do also carry 3 other ranges - Genuine LR, OEM and Pattern. If you buy Britpart its because you want the cheapest you can get. But anyone who buys a part that should cost £300 for £30 and then is surprised it doesn't last as long or work as well, come on. And just a comment on their service, I don't know how many here have actually dealt with them directly because they only deal with trade. Because my car is in Bangladesh and parts are hard to come by, some other LR owners and I organise group-buys. We source from Britpart, Bearmach and Ramaco, three of the biggest consolidators of LR parts. Service and support from all three is great, from Britpart it goes above and beyond. Thoroughly professional, very fast and very customer-oriented. We've had them replace parts on a phone call, not even bothered about getting the faulty unit back. With something quite expensive like an alternator that didn't work out of the box they sent one out by DHL at THEIR expense and said "lets get the car running first and then worry about returning the faulty part to us". So anyway, just thought I'd share my experience of them. Of course own-brand stuff is never going to be as good as OEM. Big surprise.
Devonrangeroverman
New Member
Last week I took the plunge and purchased a Britpart Omitec Lynx for my Rangy. I followed all the steps in faxing/ emailing user codes, and my vin number. I obtained an activation code for my single home use. To date I have been unable to use it despite numerous emails and calls between Omitec and the dealer as the program refuses to let me in to activate the product, and consequently I am locked out from using it. Yesterday the product was returned to the dealer, with me expressing my disgust at Omitec, for their very poor after sales service. To date neither dealer or Omitec have come up with a solution to the issues I've had, or offered to supply a replacement, or given me a refund for the £299.99 shelled out. I tried the program on 3 different laptops, one running winxp, one running vista, and one running win7. I am quite savvy on a pc, and have tried all sorts of ways to get to the activation menu, and likewise my dealer has tried the same.
All I can say is that I cannot at this time recommend the Omitec Lynx. If and when I may get a working product, I can then review it.
Omitec if you see this comment, all I can say is you have had every opportunity to try and solve the issues, of which you have failed to do so
All I can say is that I cannot at this time recommend the Omitec Lynx. If and when I may get a working product, I can then review it.
Omitec if you see this comment, all I can say is you have had every opportunity to try and solve the issues, of which you have failed to do so
Datatek
Well-Known Member
Useful first post
Rob4x40
Active Member
Useful first post
Indeed! And still no response to my enquiry as yet...
Perhaps they are busy working out all the copies they can't activate?
zzr1200
Well-Known Member
Its not "Fit for Purpose", (ie: does not do what it says on the tin) contact the Dealer/****part and demand your money back then go elsewhere.
Last edited:
