Flash git! I'm going to the shop **** it, said I wouldn't drink tonight :p
cant help it, had a weak moment and refunded a skill saw at screwfix that give me the ball ache cos it jammed up the same day i bought it, so my refund just happend to be enough to cover the cost of the turrets..........fook knows how I am going to cut all this ply now though, still the Mrs lean to will just have to wait a week or so longer....:p ps if you do not hear from me again its cos she read this...:confused::confused:
 
Last edited:
cant help it, had a week moment and refunded a skill saw at screwfix that give me the ball ache cos it jammed up the same day i bought it, so my refund just happend to be enough to cover the cost of the turrets..........fook knows how I am going to cut all this ply now though, still the Mrs lean to will just have to wait a week or so longer....:p ps if you do not hear from me again its cos she read this...:confused::confused:

Get a 10 quid handsaw you'll soon be ambidextrous with it, arms like Garth :D
 
Stood in the shop 10mins rattling with the owner of this
20180730_202027.jpg

Drive past his house every time I go to my brothers. He's got a series 3 88 as well had it 30 years :eek:
 
Spring out without taking me out ;)
Got the missus to stand on hub, she aint fat honest :p lick of paint as well
20180731_112003.jpg

20180731_113440.jpg


Shiny bits, £20inc vat from craddocks
20180731_113620.jpg


Job done, didn't bother tarting the spring up. I think it's a passenger side spring cuz of the yellow paint. Is the driver side marked white for standard duty?
If so I'll get a replacement pair for the front, 20mins a side now I know how to get em out.
Would've gone back to craddocks but only got passenger side in stock.
20180731_123001.jpg




;) cheers @bankz5152 @KISSMYAURA On to other side after a bacon sarnie :p
 
Then I realised it's part of the axle
View attachment 154619

Cut off and weld replacement on?

FKIN el thats some lateral heave there! front crab style!

Could do wiv bit of 5-8mm plate an re drill but a new mount is only £10 to £15 just weld that on, proper job!

Problem is the old "impatience / need it done cos i got to use it V proper job" so use the force or alcohol whatever you prefer, and proper job it!

pic is not the right one but tis only £13 from rimmers etc
 

Attachments

  • Screen Shot 2018-07-31 at 15.23.05.png
    Screen Shot 2018-07-31 at 15.23.05.png
    56.9 KB · Views: 189
FKIN el thats some lateral heave there! front crab style!

Could do wiv bit of 5-8mm plate an re drill but a new mount is only £10 to £15 just weld that on, proper job!

Problem is the old "impatience / need it done cos i got to use it V proper job" so use the force or alcohol whatever you prefer, and proper job it!

pic is not the right one but tis only £13 from rimmers etc

Craddocks to the rescue again £10 let's do it right ;)
1533048596045353618931.jpg


Put a shout out on here for a local member with a welder and awaiting response from mobile welder so hopefully been done by tomorrow.

Gonna get the spray can out and tart up the bits and pieces then have a beer :D

Oh and cut old bracket off and grind ready
 
Last edited:
Craddocks to the rescue again £10 let's do it right ;)
View attachment 154630

Put a shout out on here for a local member with a welder and awaiting response from mobile welder so hopefully been done by tomorrow.

Gonna get the spray can out and tart up the bits and pieces then have a beer :D

Oh and cut old bracket off and grind ready
is yer buddy with the portable thermic lance not around?
 
Craddocks to the rescue again £10 let's do it right ;)
View attachment 154630

Put a shout out on here for a local member with a welder and awaiting response from mobile welder so hopefully been done by tomorrow.

Gonna get the spray can out and tart up the bits and pieces then have a beer :D

Oh and cut old bracket off and grind ready

PS use a plumb line! might be the top mounts are out of bonk, etc
 
looks like a panhard rod when snap maybe etc should line up fine when axle is brought up to it etc.
My brakes are great, just got to replace the rear flexi, pipe and maybe the lines themselves bow i have my pipe flarer etc.
Want ot fit a braided SS pipe for clutch flexi as well.
might even see how easy it is to remove a frame n refit ball joint etc.
 
Bloomin eck thast worn through proper!!

Why can't people just look after their cars properly :rolleyes:

Frustrates me quite a lot. Me mum often has a go at me for being too fastidious with the 110 - Yes I bloody am and thats why it does 70miles a day and doesnt skip a beat and you drove to the shops in the and broke down then rang me to fix it :rolleyes::rolleyes::rolleyes::rolleyes:
 
looks like a panhard rod when snap maybe etc should line up fine when axle is brought up to it etc.
My brakes are great, just got to replace the rear flexi, pipe and maybe the lines themselves bow i have my pipe flarer etc.
Want ot fit a braided SS pipe for clutch flexi as well.
might even see how easy it is to remove a frame n refit ball joint etc.

Getting brave pal don't overshoot! I've rubbed my front brake pipes down and copper greased em. That's as much as I'll do with brake pipes :D
 
Bloomin eck thast worn through proper!!

Why can't people just look after their cars properly :rolleyes:

Frustrates me quite a lot. Me mum often has a go at me for being too fastidious with the 110 - Yes I bloody am and thats why it does 70miles a day and doesnt skip a beat and you drove to the shops in the and broke down then rang me to fix it :rolleyes::rolleyes::rolleyes::rolleyes:

It's bloody dangerous ain't it. Not sure if shocks were original and washer had rusted away or they've been replaced and it was left out. Either way glad I've found it before we go away, I went off road at kelmarsh with it like that :eek:
 

Similar threads