Bennehboy

Well-Known Member

• Mar 5, 2016

• #701

Started on the front axle and knuckles

Whipped out the old oil seals, left them in for blasting so the seal lands were protected, and cleaned up the grimy bits with a wire brush on the drill - I told the blasters to try keep away from these bits...

First coat of oxide on

One knuckle done

And t'other

For anyone interested I'm using Arc Rite Tractor Paint, High Build Zinc Phosphate Red Oxide Primer -> http://arc-rite.co.uk/high-build-zinc-phosphate-primer-red-oxide---choose-size-9893-p.asp

And their Fast Dry Tractor and Machinery Enamel in black -> http://arc-rite.co.uk/fast-dry-tractor-and-machinery-enamel---choose-size--colour-9942-p.asp

My mate bought it to do some Jimny axles, and only used about 100ml they're so tiny LOL

 

Bennehboy

Well-Known Member

• Mar 5, 2016

• #702

Looking a lot better with a 2nd coat

 

Bennehboy

Well-Known Member

• Mar 6, 2016

• #703

The axles are ready for black paint now, I'll probably hold off doing that until the new balljoints are in and I've fixed the rear spring seat mount - need to get myself a welder

Once the black is on I'll clean out the tubes with paraffin, there's a fair bit of blasting media mixed in with old gear oil lining them.

 

Bennehboy

Well-Known Member

• Mar 7, 2016

• #704

First coat of black on the knuckles, really impressed with how well the paint goes on and the thickness of the coverage...

 

Bennehboy

Well-Known Member

• Mar 7, 2016

• #705

Some bits....

Rear calipers, balljoints, rear caliper carrier bolts, 4 hub nuts, 1 d3 drop link, Ferrodo rear pads, DOT4, front & rear ARB bushes, panhard rod bushes, rear drilled & grooved disks (not in pictured). About half the order, rest coming tomorrow.

Genuine front LR brake calipers, carriers & pads:

I'll bang the balljoints into the front axle early evening then get the first coat of black on.

Also going to paint the brake parts with the leftover engine paint that I have.

 

Bennehboy

Well-Known Member

• Mar 7, 2016

• #706

Balljoints pressed in... will touch up round them with some red oxide, the press took some of the paint off..

 

Bennehboy

Well-Known Member

• Mar 9, 2016

• #707

More bits...

The other d3 droplink, 2xD2 droplinks, front disks, ARB compressor, rear caliper carriers

 

Last edited: Mar 9, 2016

jamesmartin

Well-Known Member

• Mar 9, 2016

• #708

Bennehboy said:

Balljoints pressed in... will touch up round them with some red oxide, the press took some of the paint off..

Click to expand...

looking very good ,guesss what i found another of today

 

Bennehboy

Well-Known Member

• Mar 9, 2016

• #709

Ha nice one. Was that R380 I dropped off OK? I think it had everything intact other than the oil seal collar.

These axles, the only thing I'm re-using is the hubs, it looks like Timken have stopped manufacturing them, spoke to a UK reseller at Donnington who reckoned he could get them at 100 a corner but no chance of that now. Most if not all the chinese knock off have the wrong number of cutouts on the reluctor rings, 55 instead of 60, no clue why. The upshot is you have to replace all 4 or get ABS/TC issues and even then the speedo is then out.

 

jamesmartin

Well-Known Member

• Mar 9, 2016

• #710

Bennehboy said:

Ha nice one. Was that R380 I dropped off OK? I think it had everything intact other than the oil seal collar.

These axles, the only thing I'm re-using is the hubs, it looks like Timken have stopped manufacturing them, spoke to a UK reseller at Donnington who reckoned he could get them at 100 a corner but no chance of that now. Most if not all the chinese knock off have the wrong number of cutouts on the reluctor rings, 55 instead of 60, no clue why. The upshot is you have to replace all 4 or get ABS/TC issues and even then the speedo is then out.

Click to expand...

havent had chance to look yet ive been very busy at work and trying to get house sold and having to take my father to hospital once or twice a week though there is some good stuff there ,still cant buy any baulk rings except through ashcrofts ,funily enough ive just fitted a rear hub on mine it s ok for a day or 2 then lights come on again, first time ive had issues and ive fitted quite a few hubs over the years

 

Bennehboy

Well-Known Member

• Mar 9, 2016

• #711

I guess that might prove the reluctor ring theory then. If I have to replace at any point I'm going to physically eyeball the notches first.

 

jamesmartin

Well-Known Member

• Mar 9, 2016

• #712

Bennehboy said:

I guess that might prove the reluctor ring theory then. If I have to replace at any point I'm going to physically eyeball the notches first.

Click to expand...

you can only see them from the sensor hole might be tricky counting, im going to have a look though

 

Bennehboy

Well-Known Member

• Mar 9, 2016

• #713

Bit of tippex on one... or felt tip

 

jamesmartin

Well-Known Member

• Mar 9, 2016

• #714

yep ,still will be interesting to know

 

Bennehboy

Well-Known Member

• Mar 10, 2016

• #715

Truck MAP sensor ready for fitting....

ECU pulled out so the boost box can be disconnected (after red battery terminal disconnected)

Boost box disconnected

New map file uploaded to the ECU, just needs a test drive now.

 

Bennehboy

Well-Known Member

• Mar 10, 2016

• #716

Diffs arrived - heavy buggers!

4pin & 3.8 KAM CWP:

Ashlocker, pegged casing, 3.75 Ashcroft HD CWP

Air hose, solenoids, switches, and some super magnetic drain plugs for the diff cases & LT230.

 

Last edited: Mar 10, 2016

Bennehboy

Well-Known Member

• Mar 10, 2016

• #717

Hmm, do the images show ok on that last post, they just come up as broken image icons for me, but the links work fine...

 

jamesmartin

Well-Known Member

• Mar 10, 2016

• #718

not for me anyhow

 

Bennehboy

Well-Known Member

• Mar 10, 2016

• #719

Think I've fixed it.

 

Bennehboy

Well-Known Member

• Mar 10, 2016

• #720

First coat of red on all the new calliper carriers - this is the left over block paint from when I rebuilt the engine

Axles and knuckles are having some welding done tomorrow to extract some broken bolts and fix one of the spring seat retaining bolts.