aaronmorris said:
Snigger, Speaking of cutting the grass that's the job I'm being asked to do at the minute :lol:

Oh but it's not just the grass it's the hedge as well, Oh and can you weed it while you're there :eek:
Click to expand...

Yeah that's true, once you're involved you get roped in to every thing!
 
So not a lot of progress tonight. Just a few fidally little bits. Plus had a tidy up in the garage as tools were every were and couldn't find feck all :eek:

I then striped the windows out of the truck cab. And started prepping the worst bits.

DSCF1204_zpsf311bc6b.jpg
[/URL][/IMG]
 
Bloody body prep work, Why does it take so long :(

So Wednesday night I finished rubbing the truck cab down

DSCF1206_zps6174008a.jpg
[/URL][/IMG]

And tonight I've rubbed the tailgate down.

DSCF1205_zps4dd08676.jpg
[/URL][/IMG]

Hopefully I will get home at a reasonable hour tomorrow, So I can get some primmer on them in the afternoon :)
 
Tonks4x4 said:
Bodywork prep bores me to years literally!

But the longer you can stand doing it shows in the final result!
Stick at it, it's looking pretty good so far
Click to expand...

Yep same here, Drives me mad. Although I'm not doing every little scratch and dent. No point doing it showroom condition. As it will probably get scratched in the future any way.
That said I'm still spending a fecking long time doing it.
 
Looking very good indeed.

Are you going to fit the rope tie downs to the tub? If you are how many rivets are you going to put per tie down?
 
So early finish today, Home for 2:30pm. Well it's better than getting back at 6ish.

Managed to get the tailgate windscreen and truck cab in primmer.

DSCF1207_zps906fc943.jpg
[/URL][/IMG]

DSCF1208_zps2b5b29bb.jpg
[/URL][/IMG]

I wanted to take the windscreen out but i didn't fancy putting it back in my self so just masked it up.

DSCF1209_zps6271fd2e.jpg
[/URL][/IMG]

Also removed one of the inner wings as its a bit rotten and I've got a spare so might as well replace while its in bits.
Next removed the outer wing skin as I plan on fitting a new set as they're dinted to feck :eek:

Work again in the morning :( hopefully not be an all dayer. So I can get some paint on some bits in the afternoon :)
 
dodgyrob said:
Looking very good indeed.

Are you going to fit the rope tie downs to the tub? If you are how many rivets are you going to put per tie down?
Click to expand...

Cheers :)

And its not a job I'm going to be doing unless I get some sort of cover for the back. But the ones on the tailgate have got two spot welds. So if it was me I would put two rivets in :)
 
Looking good mate! Yeah as has been said already it's worth putting the effort into the prep. Did you flash over it with some etch primer aye?
 
As promised a few pics of paint :)

DSCF1218_zps9f786b5e.jpg
[/URL][/IMG]

DSCF1220_zpsdf46c468.jpg
[/URL][/IMG]

DSCF1223_zps2c9c88ac.jpg
[/URL][/IMG]

DSCF1226_zps4eccc98f.jpg
[/URL][/IMG]

Hopefully get every thing bar the tailgate fitted tomorrow as I need some new bolts for that.

Bit more of an update later :)
 
Dan_Trials said:
Good stuff, don't want the paint falling off now haha!

Shiny paintedness is looking great!
Click to expand...

Hopefully the paint wont be going any were ;)
Very happy with the results to say its only the second one I've done :)
Who ever painted it in the past obviously did a crap job as it was flaking of in places.


cowasaki said:
Wahay! Do you want to do mine next :lol:
Click to expand...

Paint?
If so you prep it and I'd give it a quick blow over for you :)
 
Other progress today was on the wings.

I'm Putting another set of wing skins on as they currently look like this :eek:

DSCF1217_zps4aac6ca0.jpg
[/URL][/IMG]

Removed skin and inner wing

DSCF1214_zps17ff0324.jpg
[/URL][/IMG]

Chequer plate lights and surrounds removed.

DSCF1216_zps72e36955.jpg
[/URL][/IMG]

And which way does everyone fit the front wings?
When I did my brothers I fitted them with the inner wings attached but was a bit awkward.
Is it any easier to fit them separately?
 
So first job this morning was to fit the windscreen and the truck cab back.
And sat the roof on to make sure every thing lined up :)
Couldn't fit the vent flaps as I need some new seals.

DSCF1228_zps599023e9.jpg
[/URL][/IMG]

Next job was to fit a better set of wing skins. Had a set of td5 wings in the shed, Was saving them for when I build some thing on a galv chassis and the best body I can, But ill sort that when it actually happens, So I robbed the skins of them :p

Looking much better :)

DSCF1229_zpsb13e284a.jpg
[/URL][/IMG]

DSCF1231_zpsaaebe6c3.jpg
[/URL][/IMG]

Next job was to clean the inner wings up,
This was during the prep.

DSCF1232_zps9abf1165.jpg
[/URL][/IMG]

And then liberally coted in tetra Shultz.

DSCF1233_zpse88ecd84.jpg
[/URL][/IMG]
 
You must log in or register to reply here.

Similar threads

S
Black and White Smoke 1988 90
Replies
6
Views
264
tottot
tottot
Skolmate
Defender 200tdi LT77 noise and rebuild
Replies
13
Views
920
dag019
dag019
Seph98
LT230 advice
Replies
2
Views
283
Brown
Brown
G
Starting problem
Replies
1
Views
206
Anaconda
A
Defender90 ged
Help needed
Replies
0
Views
228
Defender90 ged
Defender90 ged