classic kev
Well-Known Member
That's no tank it's a space station!
- Sorry couldn't help that one.It's a sub woofer.
That's no tank it's a space station!
- Sorry couldn't help that one.It's a sub woofer.
Rustystuff
Active Member
Usually associated with a CD multi changer, it lives in the space under the subwoofer. Mine has all that kit in... optional extra I would say..... they sound pretty good for a factory setup.
Rustystuff
Active Member
Is there a single cable somewhere that has a connector with a multi pin connector. The original kit in mine is made by Clarion, the head unit connects to the CD changer by what they call a 'C Bus' connection.
There may have been lower specs that didn't have one ??
There may have been lower specs that didn't have one ??
Rustystuff
Active Member
Last edited:
stutab
Well-Known Member
Right, today I finally started work on the Rangy [emoji41]
Went to move it into the barn and nothing, found that when my lad was sitting in it last weekend he turned the lights on, bugger. So I stuck the charger on and went to get some bits from the motor factors. Got back and she struck straight up [emoji2] so drove round to the barn then set the ramps up and went to drive up, but no. The front prop is missing so trying to get up metal ramps in one wheel drive and bald tyres, not going to happen. Gave up with that and pushed it up with the forklift [emoji23]
Half way through cutting out the ns sill my grinder spat out it's cooling fan in small pieces through the vent holes [emoji35] couldn't find another in either workshop's so trapsed to Wickes and bought a new Bosh one. So far the best one I have owned has been a Silverline one that I paid £6 for in a closing down sale new.
Right picky time
Went to move it into the barn and nothing, found that when my lad was sitting in it last weekend he turned the lights on, bugger. So I stuck the charger on and went to get some bits from the motor factors. Got back and she struck straight up [emoji2] so drove round to the barn then set the ramps up and went to drive up, but no. The front prop is missing so trying to get up metal ramps in one wheel drive and bald tyres, not going to happen. Gave up with that and pushed it up with the forklift [emoji23]
Half way through cutting out the ns sill my grinder spat out it's cooling fan in small pieces through the vent holes [emoji35] couldn't find another in either workshop's so trapsed to Wickes and bought a new Bosh one. So far the best one I have owned has been a Silverline one that I paid £6 for in a closing down sale new.
Right picky time
Rustystuff
Active Member
At least your rear inner wings are ok..... mine were shot ! Sills looked very much like yours. I see you still have the post bottoms ! Good stuff.... you'll soon be enjoying the benefits of Range Rover ownership...... there are some honest
stutab
Well-Known Member
At least your rear inner wings are ok..... mine were shot ! Sills looked very much like yours. I see you still have the post bottoms ! Good stuff.... you'll soon be enjoying the benefits of Range Rover ownership...... there are some honest
Hope so Rusty, I was hoping to have it on the road by the 11th, not looking good.
stutab
Well-Known Member
Right, tonights antics are as follows
I needed to hold the plate in place somehow
All was going well until this happened
So I put the 0.6mm real out of the Wolf mig in
But the big brute kept kinking the wire so I had to fit the new sheath into the wolf and carry on with that
Bit of a size difference
So thats the NS all welded up
So as it was only 9pm I decided to investigate the other side and errrrrrrr
Hmmm guess what I'm doing tomorrow
I needed to hold the plate in place somehow
All was going well until this happened
So I put the 0.6mm real out of the Wolf mig in
But the big brute kept kinking the wire so I had to fit the new sheath into the wolf and carry on with that
Bit of a size difference
So thats the NS all welded up
So as it was only 9pm I decided to investigate the other side and errrrrrrr
Hmmm guess what I'm doing tomorrow
Rustystuff
Active Member
Oh
brianp38dse
Well-Known Member
Looking better
stutab
Well-Known Member
Cheers.Looking better
I'm hoping to finish this sill tonight then it's evicted out of the barn for two weeks [emoji22]
