LUKBENPHI
Well-Known Member
Right so here we are with a project thread for my newly acquired Disco 3 XS Auto on the advice of @gstuart
It won't be having many ways of mods and she's been run on a tight budget which will mostly be allocated to maintenance so will be more of a blog of the comings and goings as we start our time together
91 k on the clocks pretty much every receipt from the second and third owners, ( 1st was a dealer and it was their demo car) and so far were all good bar the lack of receipt for the all important oil pump so currently she's sat as she is in the photo awaiting funds to be able to book in for the front and rear belts along with the oil pump replacement which isn't helped by the company I work for pushing back our pay date from the 15th to the 28th of the month so this months disco funds will mostly involve keeping food on the table!
Happy I ain't but moving on...
She's had the compressor changed, handbrake module shoes etc, front bearings etc etc so as far as I can tell all the important stuff has been done, I'm sure I'll find something that needs doing but for now I think once shes had pump done we should be ok for a while
Condition wise there is a very slight amount of rust creeping on the bottom of the rear arches on the passenger side but having been underneath with a torch the sill is intact and I cant see any undue crap built up behind the shields but I will be taking them off to have a proper look and waxoil/dinitrol at a later date.
Anyhoo more updates to follow as and when
It won't be having many ways of mods and she's been run on a tight budget which will mostly be allocated to maintenance so will be more of a blog of the comings and goings as we start our time together
91 k on the clocks pretty much every receipt from the second and third owners, ( 1st was a dealer and it was their demo car) and so far were all good bar the lack of receipt for the all important oil pump so currently she's sat as she is in the photo awaiting funds to be able to book in for the front and rear belts along with the oil pump replacement which isn't helped by the company I work for pushing back our pay date from the 15th to the 28th of the month so this months disco funds will mostly involve keeping food on the table!
Happy I ain't but moving on...
She's had the compressor changed, handbrake module shoes etc, front bearings etc etc so as far as I can tell all the important stuff has been done, I'm sure I'll find something that needs doing but for now I think once shes had pump done we should be ok for a while
Condition wise there is a very slight amount of rust creeping on the bottom of the rear arches on the passenger side but having been underneath with a torch the sill is intact and I cant see any undue crap built up behind the shields but I will be taking them off to have a proper look and waxoil/dinitrol at a later date.
Anyhoo more updates to follow as and when